1
SQUEEZE
2
1
1533
2
Figure 4
1.
Chute crank
2.
Chute crank gear
1531
7.
Secure the upper and lower tubing and the mounting
plate together with 2 machine screws and locknuts.
Figure 2
1.
Upper tubing
2. Lower tubing
Note: Position the screw heads on the outside of the
mounting plate. Be careful not to damage the internal
electrical wiring when you insert the screws. If the
wiring blocks the hole, use a blunt 1/8-in. punch to
carefully route the electrical wiring away from the aligned
holes.
3.
4.
Carefully insert the left side of the upper tubing into
the end of the lower left side tubing (Fig. 2).
Squeeze the upper tubes together, and wiggle the upper
tubes down until the mounting holes in the upper and
lower tubing line up (Fig. 2).
Installing the Discharge Chute
5.
Place the mounting plate over the tubes (Fig. 3). Align
the mounting plate holes with the upper and lower
tubing holes.
1.
Position the chute deflector onto the discharge chute
and align the mounting holes (Fig. 5).
2
1
1
4
3
5
6
2
1532
Figure 3
1.
2.
Mountingplate
Shroud
3.
4.
Chute crank
Gear
4
3
6.
Insert the end of the chute crank through the hole in
the shroud. Turn the chute crank rod lightly until the
flattened end drops into the slot in the gear. Firmly
push the chute crank into the gear until it snaps into
place (Figs. 3 and 4).
1534
Figure 5
1.
2.
3.
Chute deflector
Discharge chute
Rubber washer (2)
4.
5.
6.
Carriage bolt (2)
Metal washer (2)
Locknut (2)
2.
Insert 2 rubber washers between the chute deflector
and the discharge chute while maintaining the hole
alignment (Fig. 5).
5
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38025 |
| Model Number | 38025 |
| Model Year | 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 230000001 - 230999999, 240000001 - 240999999, 250000001 - 250999999, 260000001 - 260999999, 270000001 - 270999999, 280000001 - 280999999, 290000001 - 290999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 12 amp |
| Engine Motor Type | 120-VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)