Maintenance
Replacing the Rotor
1.
Remove the 3 screws that secure the right side cover
and the skid to the snowthrower frame (Fig. 13).
Note: Determine the left and right sides of the
snowthrower by standing in the normal operating position.
Warning
If the extension cord is plugged into the
snowthrower and the key is in the handle,
someone could accidentally operate snowthrower
while you are performing maintenance on it,
causing serious personal injury.
2
1
3
1537
Disconnect the extension cord before you perform
any maintenance. Hold the key down, turn it
clockwise and remove it from the handle.
Figure 13
1.
2.
Right side cover
Screw
3.
Skid
2.
Using a 5/16-inch Allen wrench, turn the rotor shaft
clockwise (left-hand thread) while holding the rotor
(Fig. 14).
Lubricating the Snowthrower
You do not need to lubricate the snowthrower; all the
bearings were lubricated at the factory for the life of the
snowthrower.
Note: You may need to tap the Allen wrench with a
hammer to loosen the rotor shaft. Wedge a stick or a
hammer handle in the rotor to prevent it from rotating.
Replacing the Scraper
The scraper is located at the bottom of the rotor housing
as shown in Figure 12.
1
2
1538
2
Figure 14
2
1.
Rotor shaft
2.
Rotor
Note: If you cannot remove the rotor shaft by holding the
rotor, remove the left side cover and the skid (Fig. 15).
Hold the hex nut with a 7/8-inch wrench while unscrewing
the rotor shaft (Fig. 16).
1
1517
Figure 12
1.
Scraper
2.
Screw
1.
2.
Remove the 2 screws that secure the scraper to the
snowthrower (Fig. 12).
Install the new scraper and fasten it securely with
2
screws.
1
2
1539
Figure 15
1.
Left side cover
2.
Skid
9
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 1800 Power Curve, Toro 38025 |
Model Number | 38025 |
Model Year | 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
Download File |
|
Document Type | Operator's Manual |
Language | English, Français |
Serial Number | 230000001 - 230999999, 240000001 - 240999999, 250000001 - 250999999, 260000001 - 260999999, 270000001 - 270999999, 280000001 - 280999999, 290000001 - 290999999 |
Product Name | 1800 Power Curve Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower |
Swath | 18 inch |
Discharge | Single Stage |
Engine Motor Size | 12 amp |
Engine Motor Type | 120-VAC |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)