Poulan ES300 Chainsaw Owners Manual

Overcutting
Undercutting
1st Cut
2
nd Cut
Undercutting involves cutting on the un-
derside of the log with top of saw against
the log. When undercutting use light  up-
ward pressure. Hold saw firmly and main-
tain control.  The  saw will  tend to  push
back toward you.
Using a support stand
nd Cut
2
WARNING: Never turn sawupside
down to undercut.  The saw cannot  be
controlled in this position.
1
st Cut
Always make your  first cut on  the com-
pressions side of the log.  The compres-
sion side of the log is where the pressure
of the log’s weight is concentrated.
1st Cut
2nd Cut
First cut on compression side  of log
LIMBING AND PRUNING
Second cut
Second cut
WARNING: Be alert for and guard
against kickback. Do not allow the mov-
ing chain to contact any other branches
or objects at  the nose of the guide  bar
when limbing or pruning. Allowing such
contact can result in serious injury.
First cut on compression side  of log
BUCKING WITHOUT A SUPPORT
WARNING: Never climb into a tree
S Overcut through 1/3 of the diameter of    to  limb or prune.  Do not stand  on lad-
the log.
S Roll the log over and finish with a sec-    which can cause  you to lose your  bal-
ders, platforms, a log, or in any position
ond overcut.
ance or control of the saw.
S Watch  for  logs  with  a  compression    IMPORTANT POINTS
side to prevent the saw from pinching.
S Watch  out  for  spring  poles.  Spring
See illustration above for  cutting logs
with a compression side.
poles are small  size limbs which can
whip toward  you  or pull  you off  bal-
ance. Use extreme caution when cut-
ting small size limbs.
BUCKING USING A LOG OR
SUPPORT STAND
S Remember your first  cut is always on    S  Be  alert  for  spring   back  from  any
the compression side of the log.
(Refer to the illustration below for your
first and second cut)
branches that are bent or under pres-
sure. Avoid being struck bythebranch
or  the saw  when the  tension  in the
wood fibers is released.
S Your first  cut should extend 1/3 of the
diameter of the log.
S Finish with your second cut.
S Frequently  clear branches out  of the
way to avoid tripping over them.
LIMBING
Using a log for support
Limb a tree only after it is cut down.
S
S Leave the larger limbs underneath the
felled tree  to support the tree  as you
work.
2
nd Cut
S Start at the base of the felled tree and
work toward the top, cutting branches
and limbs.  Remove small  limbs with
one cut.
1
st Cut
S Keep tree between you and the chain.
10
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags
Model Year2003
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website