Poulan ES300 Chainsaw Owners Manual

S Keep the  handles dry and clean  and
free from oil and grease.
larized extension cord only one way. If
the plug does not fit fully into the exten-
sion cord, reverse the  plug. If the plug
still does not fit, obtain  a correct polar-
ized extension cord. A polarized exten-
sion cord will require the use of a polar-
ized wall outlet. This plug will fit into the
polarized  wall outlet  only  one way.  If
plug does not fit fully into the wall outlet,
reverse the plug. If the plugstill doesnot
fit,contactaqualifiedelectriciantoinstall
theproperwall  outlet.Donotchangethe
equipment plug, extension cord recep-
tacle, or extension cord plug in any way.
S Keep  oil cap and  fasteners securely
tightened.
S Nonconforming   replacement  compo-
nents or the removal of  safety devices
may cause damage to the unit and pos-
sible injury to the  operator or bystand-
ers. Use only Poulan  accessories and
replacement  parts  as  recommended.
Never modify your saw.
S Maintain chain saw with care.
S Keep  unit sharp and  clean for better
and safer performance.
S Follow instructions  for lubricating and    S  To reduce risk of  electrical shock, use
changing accessories.
S Unplug the chain saw from the power
source when not in use, before servic-
ing, and when  changing accessories
and attachments, such  as saw chain
and guard.
extension cords specifically marked as
suitable  for outdoor  appliances.
The
electrical rating of the cord must not be
less than  the rating  of unit.  The cord
must be  marked with  suffix “W--A” (in
Canada,  “W”). Use  a  polarized  cord.
Make  sure your  extension  cord is  in
good condition. Inspect extension cord
before use and replace if damaged. Do
not use a damaged cord.  Cord insula-
tion must be intact with no cracks or de-
S Check  for damaged parts.  Before fur-
ther use  of the chain saw,  a guard or
other part  that is  damaged should be
carefullycheckedtodeterminethat   itwill
operate  properly  and  perform  its  in-
tended function. Check for alignment of
moving parts, binding of  moving parts,
breakage of  parts, mounting  and any
other conditions that may affect  its op-
eration. A  guard  or other  part  that is
damaged should  be properly repaired
or replaced  by  an authorized  service
dealer unless otherwise indicated else-
where in the instruction manual.
terioration.
Plug connectors  must  be
undamaged.  An undersized extension
cord will cause a drop in line voltage re-
sultinginlossofpower   andoverheating.
If in doubt, use the next heavier gauge.
The lowerthe gaugenumber, theheavi-
er the cord (see SELECT ANEXTENSION
CORD in the  OPERATION section).  Do
not use multiple cords.
S When not  in use, chain  saws should     S Do  not abuse  cord. Never  carry the
be stored in  a dry, high  or locked-up
place out of the reach of children.
unit by the extension cord or yank ex-
tension cord to disconnect unit.
S When storing  saw, unplug and use a     S  Secure extension cord to power cord
bar sheath or carrying case.
to prevent disconnection from unit.
S Do not use the unit  if the switch does
not turn the unit on and off properly, or
if the lockout does not work. Repairs to
the switch must be made by an autho-
rized service dealer.
ELECTRICAL SAFETY
WARNING:   Avoid  a  dangerous
environment.  To reduce the risk of elec-
trical shock, do not use in rain, in damp
or wet  locations,  or around  swimming    S  Keep extension cord clear of operator
pools, hot tubs,  etc.  Do not expose  to
snow,rain, or water to avoid the possibil-
ity of electrical shock. Do not handle ex-
tension cord or plug with wet hands.
S Use a voltage supply as shown on the
nameplate of the unit.
and  obstacles  at all  times.  Position
cord so  that it  will not  be caught  on
branches.  Do  not  expose  cords  to
heat, oil, water, or sharp edges.
To  avoid  the   possibility  of   electric
shock,  avoid body  contact  with any
grounded  conductor, such  as  metal
fences or pipes.
S
S Avoid  dangerous  situations.  Do  not
use in the presence of flammable  liq-
uids or gases to avoid creating a fire or  S Ground  Fault Circuit Interrupter (GFCI)
explosion and/or  causing damage to
unit.
protection should be provided on circuit
or outlet  to be used.  Receptacles are
available havingbuilt-in GFCIprotection
and may be  used for this  measure of
safety. Inspect chain saw cords periodi-
cally and if damaged, have repaired by
an authorized service dealer.
S To  reduce the risk  of electrical shock,
this appliance has a polarized plug (one
bladeiswider  thanthe other)and will re-
quire the use of  a polarized extension
cord.Theapplianceplugwill   fitintoapo-
3
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags
Model Year2003
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website