Replacing the Scraper
2.
Use a 5/16-inch Allen wrench to turn the rotor shaft
clockwise (left-hand thread) while holding the rotor
(Fig. 12).
The scraper is located at the bottom of the rotor housing
as shown in Figure 10.
2
1
2
2
1538
Figure 12
1
1517
1.
Rotor shaft
2.
Rotor
Figure 10
1.
Scraper
2.
Screw
Note: You may need to tap the Allen wrench with a
hammer to loosen the rotor shaft. Wedge a stick or a
hammer handle in the rotor to prevent it from rotating.
1.
2.
Remove the 2 screws that secure the scraper to the
snowthrower (Fig. 10).
Note: If you cannot remove the rotor shaft by holding the
rotor, remove the left side cover and the skid (Fig. 13).
Install the new scraper and fasten it securely with
2
screws.
Replacing the Rotor
1.
Remove the 3 screws that secure the right side cover
and the skid to the snowthrower frame (Fig. 11).
1
2
1539
Figure 13
1.
Left side cover
2.
Skid
2
3.
Hold the hex nut with a 7/8-inch wrench while
unscrewing the rotor shaft (Fig. 14).
1
3
1537
Figure 11
1.
2.
Right side cover
Screw
3.
Skid
1
1525
Figure 14
1.
Hex nut
4.
5.
Hold the rotor and pull out the rotor shaft.
Remove the rotor.
10
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 1800 Power Curve, Toro 38026 |
Model Number | 38026 |
Model Year | 2004, 2005 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 240000001 - 240999999, 250000001 - 250999999 |
Product Name | 1800 Power Curve Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower |
Swath | 18 inch |
Discharge | Single Stage |
Engine Motor Size | 7.3 amp |
Engine Motor Type | 230 VAC |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)