Setup
6.
Place the mounting plate over the tubes (Fig. 3).
2
1
Note: Determine the left and right hand sides of the
snowthrower by standing in the normal operating position.
4
3
Installing the Upper Handle
and Chute Crank
1.
Stand the snowthrower on its wheels and position the
upper handle.
1532
2.
Inspect the open internal wiring; if it is damaged, do
not assemble. Contact an Authorized Service Dealer.
Figure 3
1.
2.
Mountingplate
Shroud
3.
4.
Chute crank
Gear
Caution
Internal wiring could be damaged during
assembly, causing serious personal injury when
operating the snowthrower.
7.
8.
9.
Align the mounting plate holes with the upper and
lower tubing holes.
Insert the end of the chute crank through the hole in
the shroud.
•
•
Carefully assemble the snowthrower so that you
will not damage the electrical wiring.
If wiring is damaged, do not assemble the
snowthrower. Contact an Authorized Service
Dealer.
Turn the chute crank rod slowly until the flattened end
drops into the slot in the gear, then firmly push the
chute crank into the gear until it snaps into place
(Figs. 3 and 4).
3.
Carefully insert the right side of the upper tubing over
the end of the lower right side tubing (Fig. 2).
1
2
1
SQUEEZE
1533
Figure 4
1.
Chute crank
2. Chute crank gear
2
10.
Secure the upper and lower tubing and the mounting
plate together with 2 machine screws and 2 locknuts.
1531
Note: Position the screw heads on the outside of the
mounting plate. Be careful not to damage the internal
electrical wiring when you insert the screws. If the
wiring blocks the hole, use a blunt 1/8-in. punch to
carefully route the electrical wiring away from the aligned
holes.
Figure 2
1.
Upper tubing
2. Lower tubing
4.
5.
Carefully insert the left side of the upper tubing into
the end of the lower left side tubing (Fig. 2).
Squeeze the upper tubes together, and wiggle the upper
tubes down until the mounting holes in the upper and
lower tubing line up (Fig. 2).
6
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38026 |
| Model Number | 38026 |
| Model Year | 2004, 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999, 250000001 - 250999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 7.3 amp |
| Engine Motor Type | 230 VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)