7.
Rotate the rotor with your left hand while sliding the
belt onto the large pulley with your right hand
(Fig. 19).
7. Slide 2 washers onto the bolt and insert the bolt
through the small pulley.
Note: The bolt must ride on bearings in the small
pulley.
8.
Place the new belt on the small pulley.
9.
Slide the belt over the motor shaft pulley (Fig. 20).
10.
Torque the bolt to 25 to 30 in-lb (2.8 to 3.4 N⋅m). Do
not overtighten the bolt.
Note: The bolt, the bolt head, and the washers must be
flush against the small pulley.
1529
Figure 19
11.
Slip the large belt over the small pulley (Fig. 19).
Refer to step 5 through 9 of Replacing the Large Belt
on page 11.
8.
9.
Assemble the idler spring (Fig. 16), ensuring that the
idler pulley rides on the belt.
Storage
Install the left side cover and the skid with the
3
screws.
1.
Run the snowthrower for a few minutes to melt away
any snow on the snowthrower.
Replacing the Small Belt
2.
3.
Disconnect the extension cord from the snowthrower.
1.
Remove the screws that secure the left side plate and
the skid to the snowthrower frame (Fig. 13).
Examine the extension cord thoroughly for signs of
wear or damage. Replace it if it is worn or damaged.
2.
3.
Remove the side plate and the skid.
4.
Examine the snowthrower thoroughly for worn, loose,
or damaged parts. For repairing or replacing parts,
contact an local Authorized Service Dealer for
assistance.
Remove the large belt by slowly sliding it off the small
pulley (Fig. 17).
Note: Refer to steps 2 and 3 of Replacing the Large
Belt on page 11.
5.
6.
Store the extension cord with the snowthrower.
Store the snowthrower in a clean, dry place.
4.
5.
Remove the small pulley bolt (left hand thread) by
turning the bolt clockwise.
Remove the 2 washers and the small pulley (Fig. 20).
5
4
3
2
1
1530
Figure 20
1.
2.
3.
Bolt (left-hand thread)
Washers
Small pulley
4.
5.
Small belt
Motor shaft pulley
6.
Remove and discard the small belt (Fig. 20).
12
- 12 of 12
- « Previous
- 1
- …
- 10
- 11
- 12
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38026 |
| Model Number | 38026 |
| Model Year | 2004, 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999, 250000001 - 250999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 7.3 amp |
| Engine Motor Type | 230 VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)