12
Operating the Traction
Drive
Operating the Auger/
Impeller Drive
To operate the traction drive, you must operate the
snowthrower with the self-propel feature engaged.
Refer to Freewheeling or Using the Self-propel Drive
on page 9.
1. To engage the
auger/ impeller
drive, squeeze the
right hand (auger/
impeller) lever to
the handgrip.
1.
To engage the
traction drive,
squeeze the left
hand (traction)
lever to the
2. To stop the auger and impeller, release the right
hand lever.
handgrip.
Important: When you engage both the auger/impeller
lever and the traction lever, the traction lever locks
the auger/impeller lever down, freeing your right
hand. To release both levers, simply release the left
hand (traction) lever.
2.
To stop the traction drive, release the traction
3.
If the auger and impeller continue to rotate when
lever.
you release the auger/impeller lever, do not operate
the snowthrower. Check the auger/impeller cable
(refer to Checking and Adjusting the Auger/Impeller
Cable on page 17) and adjust it if necessary.
Otherwise, take the snowthrower to an Authorized
Dealer for service.
3.
Check to ensure that the speed selector operates
properly:
•
If the snowthrower does not move or moves
forward when it is in Position R1, remove the
trunnion from the speed selector lever, turn
the trunnion downward (clockwise) on the
speed control rod, then install the trunnion.
Warning
•
If the snowthrower does not move or moves
rearward when it is in Position 1 (forward),
remove the trunnion from the speed selector
lever, turn the trunnion upward
If the auger and impeller continue to rotate when
you release the auger/impeller lever, you could
seriously injure yourself or others.
(counterclockwise) on the speed control rod,
then install the trunnion.
Do not operate the snowthrower. Take it to an
Authorized Service Dealer for service.
Operating the Quick Stickt
Note: Refer to the relevant steps in Installing the
Traction Control Linkage on page 7.
Note: If the snowthrower moves when the traction
lever is in the released position, check the traction
cable (refer to Checking and Adjusting the Traction
Cable on page 17) or take the snowthrower to an
Authorized Service Dealer for service.
Push and hold the blue trigger cap down to use the
Quick Stick to move the discharge chute and the
chute deflector. Release the trigger cap to lock the
discharge chute and chute deflector into position.
Operating the Speed
Selector
The speed selector has
6
forward and 2 reverse
gears. To change
speeds, release the
traction lever and shift
the speed selector lever
to the desired position.
The lever locks in a
notch at each speed
selection.
m-6905
3329-773
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38632, Toro Power Max 828LE |
| Model Number | 38632 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999 |
| Product Name | Toro Power Max 828 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | HMSK80-155672X |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)