Toro Power Max 828LE 38632 Snow Blower Operators Manual, 2004

17
Checking and Adjusting the     Checking and Adjusting the
Traction Cable
Auger/Impeller Cable
Check and adjust the traction cable after the first 2
operating hours, then annually thereafter. If the
snowthrower does not drive in the forward or reverse
speeds or it drives when you release the traction
lever, adjust the traction cable.
Check and adjust the auger/impeller cable after the
first 2 operating hours, then annually thereafter.
1.
Remove the 2
screws from the right
side of the belt cover as
shown.
With the traction lever disengaged, check the pin (A)
in the elongated slot in the left side of the
snowthrower above the tire (B). There should be a
gap of 1/32 to 1/16 inch (1 to 1.5 mm) from the front
of the slot to the front edge of the pin.
2.
Lift up the right side
of the belt cover.
1/32
to 1/16 inch (1 to 1.5 mm)
m-6922
3.
With the auger/impeller lever disengaged, ensure
that the gap between the auger clutch assembly and
the tab (A) is 1/16 inch (1.5 mm).
A
B
1/16 inch (1.5 mm)
A
m-6962
If the left hand (traction) cable is not properly
adjusted, do the following steps:
A
1.
Loosen the
jam nut (A).
2.
Loosen or
tighten the
turnbuckle (B) to
adjust the pin until
it is the proper gap
from the front edge
of the slot.
4.
adjusted, do the following steps:
If the auger/impeller cable is not properly
B
A
5.   Loosen the jam
nut (A).
B
3.
jam nut.
Tighten the
6.   Loosen or tighten
the turnbuckle (B) that
adjusts the tension on
m-6966
A
the cable.
m-6903
7.
Adjust the turnbuckle until you obtain the proper
gap.
8.
9.
Tighten the jam nut.
Insert the 2 screws you previously removed on
the belt cover.
10.
If the auger/impeller cable is properly adjusted but
a problem remains, contact an Authorized Service
Dealer.
3329-773
Rev A
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38632
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number240000001 - 240999999
Product NameToro Power Max 828 LE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath28 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type26 oz. (.8l) 5w-30 or 10w / API SH or higher
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #HMSK80-155672X
Engine Motor Size8 hp
Engine Motor Type4 Cycle CARB2, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website