5.
Slide guide bar behind clutch drum until
guide bar stops against clutch drum
sprocket.
CHAIN TENSION (Including units with
chain already installed)
NOTE: When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
Checking the tension:
Use the screwdriver end of the chain adjust-
menttool(bar tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight.Iftooloose, thechainwillsagbelowthe
bar.
Mount the Bar
6.
Carefully remove the chain from the pack-
Hold chain with the drive links as
age.
shown.
Tip of
Bar
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
Adjusting the tension:
Chain tension is very important.
Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time you
use and refuel your saw.
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
You can adjust the chain tension by loosen-
ing the chain brake nuts and turning the ad-
justing screw 1/4 of a turn while lifting up on
the bar.
Cutters
Depth Gauge
S Ifchainistootight,turnadjustingscrew1/4
turn counterclockwise.
S If chain is too loose, turn adjusting screw
1/4
turn clockwise.
Drive Links
Adjusting
Screw
Guide Bar
Chain Brake Nuts
Adjusting Screw -- 1/4 Turn
Place chain onto the sprocket
7.
8.
Place chain over and behind clutch, fitting
the drive links in the clutch drum sprocket.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
Fit chain drive links into bar groove.
Pull guide bar forward until chain is snug
in guide bar groove. Ensure all drive
links are in the bar groove.
S Lift up the tip of the bar and securely tight-
en the chain brake nuts with the bar tool.
S Recheck chain tension.
9.
10.
Chain Brake
Nuts
11.
12.
Now, install chain brake making surethe
adjusting pin is positioned in the lower
hole inthe guidebar. Remember this pin
moves the bar forward and backward as
the screw is turned.
Installchainbrakenutsandfingertighten
only. Once the chain is tensioned, you
will need to tighten chain brake nuts.
WARNING:
If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
7
| Categories | Chainsaw Manuals, Poulan Chainsaw Manuals |
|---|---|
| Tags | Poulan BH 2660 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw |
| Document File Type | |
| Publisher | poulan.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)