11
Caution
Operating the Traction
Drive
If you leave the snowthrower plugged into a
power outlet, someone can inadvertently start the
snowthrower and injure people or damage
property.
Important: To operate the traction drive, you must
operate the snowthrower with the self-propel feature
engaged. Refer to Freewheeling or Using the
Self-propel Drive on page 9.
Unplug the power cord whenever you are not
starting the snowthrower.
1.
To engage the
traction drive,
squeeze the left
hand (traction)
lever to the
Stopping the Engine
1.
Move the
handgrip.
throttle to the Stop
position.
2.
To stop the traction drive, release the traction
lever.
3.
Check to ensure that the speed selector operates
properly:
2.
Wait for all moving parts to stop before leaving
•
If the snowthrower does not move or moves
the operating position.
forward when it is in Position R1, remove the
trunnion from the speed selector lever, turn
the trunnion downward (clockwise) on the
speed control rod, then install the trunnion.
3.
Close the fuel
shutoff valve by
rotating it
clockwise.
•
If the snowthrower does not move or moves
rearward when it is in Position 1 (forward),
remove the trunnion from the speed selector
lever, turn the trunnion upward
(counterclockwise) on the speed control rod,
then install the trunnion.
Note: Refer to the relevant steps in Installing the
Traction Control Linkage on page 7.
Note: If the snowthrower moves when the traction
lever is in the released position, check the traction
cable (refer to Checking and Adjusting the Traction
Cable on page 16) or take the snowthrower to an
Authorized Service Dealer for service.
4.
prevent the recoil starter from freezing up.
Pull the recoil starter 3 or 4 times. This helps
Operating the Speed
Selector
The speed selector has
6
forward and 2 reverse
gears. To change
speeds, release the
traction lever and shift
the speed selector lever
to the desired position.
The lever locks in a
notch at each speed
selection.
m-6905
3352-464
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38620, Toro Power Max 826LE |
| Model Number | 38620 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 250010001 - 250999999 |
| Product Name | Toro Power Max 826 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro Power Max 826LE 38620 Snow Blower Operators Manual, 2005 2.0 out of 2.0 based on 1 product reviews.