14
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Maintenance Procedure
Interval
•
Check the engine oil level and add oil if necessary. Refer to Checking the Engine
Oil Level on page 15.
Each Use
•
•
Change the engine oil. Refer to Changing the Engine Oil on page 17.
Inspect the traction cable and adjust it if necessary. Refer to Checking and
Adjusting the Traction Cable on page 16.
After the First
Operating Hours
2
•
Inspect the auger/impeller cable and adjust it if necessary. Refer to Checking
and Adjusting the Auger/Impeller Cable on page 16.
•
•
Change the engine oil. Refer to Changing the Engine Oil on page 17.
Check the skids and the scraper and adjust them if necessary. Refer to
Checking and Adjusting the Skids and Scraper on page 15.
•
•
•
•
•
Inspect the traction cable and adjust or replace it if necessary. Refer to Checking
and Adjusting the Traction Cable on page 16.
Inspect the auger/impeller cable and adjust or replace it if necessary. Refer to
Checking and Adjusting the Auger/Impeller Cable on page 16.
Inspect the spark plug. Replace and/or gap it if necessary. Refer to Inspecting
and Replacing the Spark Plug on page 18.
Annually
Check the auger gearbox oil and add oil if necessary. Refer to Checking the
Auger Gearbox Oil Level on page 17.
Check the tire pressure and inflate them to the proper pressure. Refer to
Checking the Tire Pressure on page 9.
•
•
Lubricate the hex shaft. Refer to Lubricating the Hex Shaft on page 18.
Drain the gasoline and run the engine to dry out the fuel tank and the carburetor
at the end of the snowthrowing season. Refer to Preparing the Snowthrower for
Storage on page 20.
•
Have an Authorized Service Dealer inspect and replace the traction drive belt
and/or the auger/impeller drive belt if necessary.
Important: You can find more information about maintaining and servicing your snowthrower at www.Toro.com.
Important: Refer to your engine operator’s manual for additional maintenance procedures. For engine
adjustments, repairs, or warranty service not covered in this manual, contact an Authorized Tecumseh Servicing
Dealer.
Preparing for Maintenance
1.
Move the snowthrower to a level surface.
3. Disconnect the
spark plug wire.
2.
Stop the engine and wait for all moving parts to
stop.
3352-464
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38620, Toro Power Max 826LE |
| Model Number | 38620 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 250010001 - 250999999 |
| Product Name | Toro Power Max 826 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro Power Max 826LE 38620 Snow Blower Operators Manual, 2005 2.0 out of 2.0 based on 1 product reviews.