8
Installing the Chute Control
Rod
8.
cable clip (A) that
supports the
Insert the
deflector cable (B)
onto the forward
carriage bolt, and
secure the carriage
bolts with locknuts
from the loose
1.
Stick.
Remove the packaging materials from the Quick
B
2.
Stick so that it is upright and in the center.
From the operating position, rotate the Quick
A
3.
the lever fully rearward.
Press and hold the blue trigger cap down and pull
parts bag.
9.
Press and hold the blue trigger cap down to
Note: The discharge chute and deflector should
face forward. If they do not, press and hold the
blue trigger cap down (but do not move the Quick
Stick), and reach forward and rotate the discharge
chute until it faces directly forward.
unlock the Quick Stick.
10.
Rotate the Quick Stick in a circle to ensure that
the chute and deflector operate smoothly.
4.
Align the flattened back end of the long chute
Filling the Engine with Oil
control rod (A) with the flattened front end of the short
rod (B) that extends from the front of the control panel
so that they nest together.
Your snowthrower comes with only a few ounces of
oil in the engine. Before starting the engine, add
oil.
Note: The bottle that comes with the snowthrower
contains 25 oz. of oil.
m–6973
Max. fill: 26 oz. (0.77 l), type: automotive detergent oil
with an API service classification of SF, SG, SH, SJ,
SL, or higher.
A
•
•
•
For temperatures above 32°F (0°C), use
SAE 30W.
B
For temperatures between 0°F and 32°F (–18°C
to 0°C), use SAE 5W30 or SAE 10W.
For air temperatures below 0°F (–18°C), use
SAE 0W30.
m-6969
5.
chute control rod in
this orientation
(you must move it
back to insert it
into the gear) and
insert the front end
of the rod into the
opening in the
Hold the long
1.
dipstick.
Remove the
2.
Slowly pour oil
into the oil fill tube
to raise the oil level
to the Full mark on
the dipstick. Do
not overfill.
back of the chute
gear cover until it
slides into the
3.
dipstick securely.
Install the
Note: Do not spill
oil around the oil fill
tube; oil could leak
onto traction parts
and cause the
chute gear.
m-6900
6.
Align the holes in the nested ends of the rods and
insert 2 carriage bolts through the short rod from the
left side of the snowthrower (as viewed from the
operating position).
traction to slip.
7.
go through the holes in the short rod and then through
the holes in the long chute control rod.
The 2 carriage bolts (in the loose parts bag) will
3352-464
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38620, Toro Power Max 826LE |
| Model Number | 38620 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 250010001 - 250999999 |
| Product Name | Toro Power Max 826 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro Power Max 826LE 38620 Snow Blower Operators Manual, 2005 2.0 out of 2.0 based on 1 product reviews.