RULES FOR SAFE OPERATION
12.Never
slippery surfaces. Look behind and use care when operat-
ing in reverse.
13.Disengage
thrower is transported or not in use.
operate the machine at high transport speeds on
Service, Maintenance And Storage
1.
Check shear bolts and other bolts at frequent intervals for
proper tightness to be sure the equipment is in safe work-
ing condition.
power to the collector/impeller when snow-
2.
Never store the machine with fuel in the tank inside a
building where ignition sources are present such as hot
water and space heaters, or clothes dryers. Allow the en-
gine to cool before storing in any enclosure.
14.Use
only attachments and accessories approved by the
manufacturer of the snowthrower (such as cabs, tire
chains, etc..).
15.Never
operate the snowthrower without good visibility or
light. Always be sure of your footing and keep a firm hold
on the handles. Walk, never run.
touch a hot engine or muffler.
operate the snowthrower near glass enclosures,
3. Always refer to operator’s manual for important details if
the snowthrower is to be stored for an extended period.
4. Maintain or replace safety and instruction labels as
necessary.
16.Never
17.Never
automobiles, window wells, drop−offs, and the like without
proper adjustment of the snow discharge angle.
5.
Run the machine a few minutes after throwing snow to
prevent freeze−up of the collector/impeller.
6.
If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
18.Never
direct discharge at bystanders or allow anyone in
front of the unit.
leave a running unit unattended. Always disen-
19.Never
7.
8.
Always observe safe refueling and fuel handling practic-
es when refueling the unit after transportation or storage.
Always follow the engine’s manual instructions for storage
preparations before storing the unit for both short and
long term periods,
gage the auger and traction controls, stop engine, and
remove keys.
20.Do
not operate the unit while under the influence of alco-
hol or drugs.
in mind the operator is responsible for accidents
occurring to other people or property.
21.Keep
9.
Always follow the engine manual instructions for proper
start-up procedures when returning the unit to service.
22.Data
indicates that operators, age 60 years and above,
are involved in a large percentage of power equipment−
related injuries. These operators should evaluate their
ability to operate the unit safely enough to protect them-
selves and others from injury.
10.Maintain or replace safety and instruction labels as
necessary.
11.
Keep nuts and bolts tight and keep equipment in good
condition.
12.Never
tamper with safety devices. Check their proper
23.DO
NOT wear long scarves or loose clothing that could
operation regularly and make necessary repairs if they
are not functioning properly.
become entangled in moving parts.
24.
Snow can hide obstacles. Make sure to remove all ob-
stacles from the area to be cleared.
13.Components are subject to wear, damage, and deteriora-
tion. Frequently check components and replace with
manufacturer’s recommended parts, when necessary.
Children
14.Check control operation frequently. Adjust and service as
required.
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the operating activity. Never assume that children will re-
main where you last saw them.
15.Use
only factory authorized replacement parts when mak-
ing repairs.
16.Always
comply with factory specifications on all settings
1.
Keep children out of the area and under the watchful care
of another responsible adult.
Be alert and turn off if children enter the area.
Never allow children to operate the unit.
Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
and adjustments.
17.Only
authorized service locations should be utilized for
2.
3.
4.
major service and repair requirements.
18.Never attempt to make major repairs on this unit unless
you have been properly trained. Improper service pro-
cedures can result in hazardous operation, equipment
damage and voiding of manufacturer’s warranty.
Clearing A Clogged Discharge Chute
19.Check
shear bolts (pins) and other bolts at frequent inter-
vals for proper tightness to be sure the equipment is in
safe working condition.
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with
snowthrowers. Never use your hand to clean out the dis-
charge chute.
To clear the chute:
1.
2.
Emissions
1.
Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth de-
fects, or reproductive harm.
SHUT OFF THE ENGINE.
Wait 10 seconds to be sure the impeller blades have
stopped rotating.
2.
If available, look for the relevant Emissions Durability
Period and Air Index information on the engine emissions
label.
3.
Always use a clean out tool, not your hands.
1740274
5
| Categories | Husqvarna Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Husqvarna 521SSE, Husqvarna 521SSR |
| Model Year | 2006, 2007, 2008 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Husqvarna, Snow Blower |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)