DISENGAGED
Front Hand Guard
Mount the Bar
ENGAGED
6.
Carefully remove the chainfrom thepack-
age.
Hold chain with the drive links as
shown.
Chain Brake
Tip of
Bar
11.
12.
Now,installchainbrakemakingsurethe
adjusting pin is positioned in the lower
holeintheguidebar. Remember thispin
moves thebar forwardand backwardas
the screw is turned.
Install chain brake nuts and finger tight-
en only. Once the chain is tensioned,
youwillneedtotightenchainbrakenuts.
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
CHAIN TENSION
(Including units with chain already installed)
NOTE:
When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
Cutters
Depth Gauge
Checking the tension:
Use the screwdriver end of the chain adjust-
ment tool (bar tool) to move the chain around
the bar. If the chain does not rotate, it is too
tight. If too loose, the chain will sag below the
bar.
Drive Links
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
Place chain onto the sprocket
Adjusting the tension:
Chain tension is very important.
Chain
7.
8.
Place chain over and behind clutch, fit-
ting the drive links in the clutch drum
sprocket.
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time you
use and refuel your saw.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
You can adjust the chain tension by loosen-
ing the chain brake nuts and turning the ad-
justing screw 1/4 of a turn while lifting up on
the bar.
9.
10.
Fit chain drive links into bar groove.
Pullguidebar forward untilchain is snug
in guide bar groove. Ensure all drive
links are in the bar groove.
S Ifchainistootight,turnadjustingscrew1/4
turn counterclockwise.
S If chain is too loose, turn adjusting screw
1/4
turn clockwise.
NOTE:
CHAIN BRAKE MUST BE
Adjusting
Screw
DISENGAGED BEFORE INSTALLA-
TIONONTHESAW. TODISENGAGE
CHAIN BRAKE, PULL THE FRONT
HAND GUARD BACK TOWARD THE
REAR OF THE CHAIN BRAKE AS
FARASPOSSIBLE (SEEILLUSTRA-
TION).
Guide Bar
Chain Brake Nuts
7
| Categories | Chainsaw Manuals, Poulan Chainsaw Manuals |
|---|---|
| Tags | Poulan 1950, Poulan 1975, Poulan 2050, Poulan 2050WT, Poulan 2055, Poulan 2075, Poulan 2150, Poulan 2150PR, Poulan 2155, Poulan 2175, Poulan 2350, Poulan 2375 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw |
| Document File Type | |
| Publisher | poulan.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)