sawchainalongthetopoftheguidebar. This
action may push the guide bar rapidly back
toward the operator. Either of these events
may cause you to lose control of the saw
which could result in serious injury or even
death. DO NOT RELY UPON ANY OFTHE
DEVICES BUILT INTO YOUR SAW. YOU
SHOULD USE THE SAW PROPERLY AND
CAREFULLY TO AVOID KICKBACK. Re-
duced--kickback guide bars and low--kick-
back saw chains reduce the chance and
magnitude of kickback and are recom-
mended. Your saw has alow kickback chain
and bar as original equipment. Repairs on a
chain brake should be made by an autho-
rized servicing dealer. Take your unit to the
place of purchase if purchased from a ser-
vicing dealer, or to the nearest authorized
master service dealer.
Symmetrical Guide Bar
Large Radius Tip
S Low-Kickback Chain, designed with a con-
toureddepthgaugeandguardlink whichde-
flectkickbackforceandallowwoodtogradu-
ally ride into the cutter. Low-Kickback Chain
has met kickback performance require-
ments whentestedonarepresentativesam-
ple of chain saws below 3.8 cubic inch
displacement specified in ANSI B175.1.
Contoured Depth Gauge
Elongated Guard Link
S Tip contact in some cases may cause a
lightning fast reverse REACTION, kicking
guide bar up and back toward operator.
S Pinchingthesaw chainalongthetopofthe
guide bar may push the guide bar rapidly
back toward the operator.
Deflects kickback
force and allows
wood to gradually
Low--Kickback
ride into cutter
Chain
S Either ofthesereactions maycauseyouto
lose control of the saw which could result
in serious injury. Do not rely exclusively
upon safety devices built into your saw.
Can Obstruct
Material
WARNING:
Computed kickback
angle (CKA) listed on your saw and listed in
CKA table below represents angle of
Not a Low--Kickback Chain
S Front Handguard, designed to reduce the
chanceofyour lefthandcontactingthechain
if your hand slips off the front handlebar.
S Position of front and rear handlebars, de-
signed with distance between handles and
“in-line” with each other. The spread and “in-
line” position of the hands provided by this
designwork together togivebalance andre-
sistance in controlling the pivot of the saw
back toward the operator if kickback occurs.
the
kickback your bar and chain combinations
will have when tested in accordance with
CSA andANSIstandards.Whenpurchasing
replacement bar and chain, considerations
should be given to the lower CKA values.
Lower CKA values representsafer angles to
the user, higher values indicate more angle
and higher kick energies. Computed angles
represented in the non-activated column in-
dicate total energy and angle associated
without activation of the chain brake during
kickback. Activated angle represents chain
stopping time relative to activation angle of
chain brake and resulting kick angle of saw.
In all cases lower CKA values represent a
safer operating environment for the user.
The following guide bar and chain combina-
tions meet kickback requirements of CSA
Z62.1, Z62.3, & ANSI B175.1 when used on
saws listed in this manual. Use of bar and
chaincombinations other thanthose listedis
not recommended and may not meet the
CKA requirements per standard.
CHAIN BRAKE
S Chain Brake, designedto stopthe chainin
the event of kickback.
WARNING:
WE DO NOT REP-
RESENT AND YOU SHOULD NOT AS-
SUME THAT THE CHAIN BRAKE WILL
PROTECT YOU IN THE EVENT OF A
KICKBACK. Kickback is a lightning fast ac-
tion which throws the bar and rotating chain
back and up toward the operator. Kickback
can be caused by allowing contactof thebar
tip in the danger zone with any hard object.
Kickbackcanalsobecausedby pinchingthe
Computed kickback angle (CKA) Table
BAR
CKA without
chain brake
MODEL
CHAIN P/N
P/N
Length
330
952044701
952044701
530044833
20″
20″
22″
952051266
952051266
952051459
21_
21_
23_
380
30
3
NOTE: If this saw is to be used for commer-
cial logging, a chainbrake is required andshall
not be removed or otherwise disabled to com-
ply with Federal OSHA Regulations for Com-
mercial Logging.
5
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro 330, Poulan Pro 380 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Tried to download poulan 330 china’s manual. Would not work. Need to see carburetor. Where to put gasket