Itisnormalforanewchaintostretchdur-
ing the first15 minutes of operation.You
should recheck your chain tension fre-
quently and adjust the chain tension as
required. See CHECK CHAIN TENSION
section.
6. Place chain aroundthe sprocketand
fit the drive links into the guide bar
groove and then into the teeth of the
sprocket in the tip of the guide bar.
Replace the old chain when it becomes
worn or damaged. Use only the Low
Kickback replacement chain specified
in the listofavailable replacementparts.
Thechainmustcomplywithkickbackre-
quirementsofANSIB175.1 whentested
with this saw. See your authorized ser-
vice dealer to replace and sharpen indi-
vidual cutters on your chain.
7.
Hold the guide bar against the saw
frame and install the bar clamp. Be
sure adjusting pin is in the adjusting
pin hole in the bar.
TO REPLACE CHAIN:
1.
Disconnect the chain saw from the
power source.
Remove bar clamp nuts.
2.
3.
Remove bar clamp and old chain.
Inside view of
Bar Clamp
Adjusting pin hole
Adjusting
screw
Bar Clamp
Nuts
Adjusting pin
Bar
Adjusting Screw
8. Secure the guide bar and bar clamp
with the bar clamp nuts; tighten
finger tight only.
Clamp
4.
Turn the adjusting screw counter-
clockwise to move the adjusting pin
almost as far as it will go to the rear.
Do not remove the adjusting screw
from the bar clamp.
Carefully remove the new chainfrom
the package. Hold chain withcutters
facing as shown.
CAUTION: If saw chain is installed back-
wards, the saw will vibrate excessively
and will not cut wood.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the MAIN-
TENANCE section.
5.
CUSTOMER SERVICEABLE PARTS
Tip of
Bar
WARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART
PART NO.
Hex Nuts
Oil Cap
Bar Adjusting Screw
Bar Adjusting Pin
File (5/32″ dia.) Twin Pak
Xtra GUARDr Chain --18″
Lo--Kickr Guide Bar -- 18″
Bar & Chain Lubricant --1 qt.
Bar & Chain Lubricant --1 gal.
530015917
530053072
530016265
530053068
952055085
952051338
952044418
952030203
952030204
CUTTERS MUST FACE IN
DIRECTION OF ROTATION
Cutters
Depth Gauge
Drive Links
14
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP400E |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)