Poulan Pro PP400E Chainsaw Owners Manual

BEFORE STARTING SAW
if any part is worn to less than 0.020 (0.5
mm)  thick.  Repairs  on  a  chain  brake
should be made by your authorized ser-
vice dealer. Take your unit to the place of
purchaseorto  thenearest authorizedser-
vice dealer.
WARNING:  Be sure  to  read the
electrical safety informationin thesafety
rules section of this manual before you
begin. Ifyou do notunderstand theelec-
tricalsafetyinformationdonotattemptto
use your unit. Seek help from someone
that does understand the information or
call the customer assistance help line at
1-800-554-6723.
S This  saw  is  equipped   with  a  chain
brake.Thebrakeisdesignedto   stopthe
chain if kickback occurs.
S The inertia--activated chain brake is ac-
tivated if the front hand guard is pushed
forward, either  manually (by  hand) or
automatically (by sudden movement).
S If the brake is already activated, it is dis-
engaged by pulling thefronthandguard
back toward the front handle as  far as
possible.
GUIDE BAR AND CHAIN OIL
Thebarandchainrequirelubrication.    The
chain  oiler  provides  lubrication  to   the
chain and guide bar. Be sure to fill the bar
oil tank before each cutting session. Lack
of oil will quickly  ruin the bar and chain.
Too little oil will cause overheating shown
by smoke coming from  the chain and/or
discoloration of  the bar.   For  maximum
guide bar and chain life, we recommend
you use  Poulan or  Poulan PRO chain
saw bar oil. If Poulan or Poulan PRO bar
oil is not available, you may use  a good
grade SAE 30 oil until you are able to ob-
tain Poulan or Poulan PRO brand. Use a
funnel to fill the tank. Replace oil cap se-
curely. Check oil level after every 15 min-
utes of operation.
S
When cutting  with the  saw, the  chain
brake must be disengaged.
Disengaged
Engaged
Braking function control
CAUTION:
The  chain brake  must  be
checked several  times daily. The  motor
must  be running  when  performing  this
procedure. Thisis theonly  instancewhen
the saw should be placed on the ground
with the motor running.
CHAIN BRAKE
Ensurechainbrakeisdisengaged   bypull-
ing the front hand guard back toward the
fronthandle as far as possible. The chain
brake must be disengaged before cutting
with the saw.
Place the  saw on firm ground.  Grip the
rear handle with your right hand and the
handle   with   your   left    hand.
Squeeze trigger switch and allow motor
to reach  full speed.  Activate the  chain
brake by turning your left wrist againstthe
hand guard  without  releasing your  grip
around the fronthandle.The chainshould
stop immediately.
front
STOPPING YOUR SAW
S Release the trigger switch.
S If motor does not stop, disconnect the
extension cord.   Discontinue  use of
the unituntilithas  beenrepaired byan
authorized service dealer.
STARTING YOUR SAW
Inertia activating function control
1.
Connect the saw to a power source
usingthepropersize  extensioncord;
see SELECT AN EXTENSION CORD).
Grip both handles firmly.
Push and  hold the trigger  lock--out
button with your right hand thumb.
Squeeze and hold the triggerswitch.
WARNING:
When performing the
following procedure, the motor must not
be running  and  the saw  must be  un-
plugged from the power source.
2.
3.
Grip the rear handle with your right hand
and the front handle with your left hand.
4.
CHAIN BRAKE
Holdthechainsawapproximately14″     (35
cm) above a stump or other wooden sur-
face. Release your grip on the front han-
dleandusetheweightofthe    sawto letthe
tipoftheguidebar   fallforward andcontact
the stump. When the tip of the bar hitsthe
stump, the brake should activate.
WARNING:  If  the  brake band  is
worn too thin itmay break when the chain
brake is  triggered. With a  broken brake
band, the  chain brake  will not  stop the
chain. The chain brake must be replaced
8
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website