Important: Do not clean the electrodes because
grit could enter the cylinder and damage the
engine.
4.
Set the gap between the electrodes on the spark plug at
0.030
inch (0.76 mm) (Figure 45).
Figure47
1.
Cableconduit
2.
Cableclamp
Figure45
1.
0.030inch(0.76mm)
3. Grasp the cable conduit and move it toward the front of
the machine until the discharge chute latch fully engages
the gear teeth (Figure 47 and Figure 48).
5.
Install the spark plug by hand and then torque it to 15
ft-lb (20.4 N·m).
Note: If you do not have a torque wrench, tighten
the plug firmly.
AdjustingtheDischargeChute
Latch
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
1.
Remove the fastener on the gear cover (Figure 46), lift
the front of the cover up, and slide it back and out of
the way.
Figure48
1.
Dischargechutelatch
2.
Gearteeth
Note: The latch is spring loaded and will naturally
move into the teeth of the gear (Figure 48).
4.
Remove any slack in the cable by pulling the cable
conduit rearward.
5.
6.
Tighten the bolt on the cable clamp.
Install and secure the gear cover.
Figure46
ReplacingtheDriveBelts
2.
Loosen the bolt on the cable clamp (Figure 47).
If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, go to
www.Toro.com for additional service information or have
an Authorized Service Dealer replace the belt.
19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38621, Toro Power Max 826LE |
| Model Number | 38621 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 260000001 - 260999999 |
| Product Name | Toro Power Max 826 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Size | 318cc |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)