Toro Power Max 826LE 38621 Snow Blower Operators Manual, 2006

Note: If the trunnion does not fit into the hole when
you lift up on the speed control rod, rotate the trunnion
upward or downward on the speed control rod until
it fits.
7.
Secure the trunnion and upper end of the speed control
rod with the outer washer and a hairpin cotter you
previously removed.
Note: For easier installation, look down through the
opening in the speed selector (Figure 8).
Figure5
2.
3.
Secure the lower end of the speed control rod with the
washer and hairpin cotter that you previously removed.
Remove the hairpin cotter and the outer washer from
the trunnion on the upper end of the speed control
rod (Figure 6).
Figure8
1.
Speedselector
3. InstallingtheChuteControl
Rod
1.
2.
Unwrap the Quick Stick and rotate it so that it is upright
and in the center.
Hold the blue trigger cap down and pull the lever fully
rearward.
Figure6
Note: The discharge chute and deflector should face
forward.  If they do not, hold the blue trigger cap
down (but do not move the Quick Stick) and rotate the
discharge chute until they do.
1.
2.
Speedselectorlever
Wavewasher
3.
4.
Trunnion
Flatwasher
Note: To make installation  easier, leave the wave
washer and the flat washer on the trunnion (Figure 6).
3.
Align the flattened back end of the long chute control
rod with the flattened front end of the short  rod
that extends from the control panel so that they nest
together (Figure 9).
4.
5.
Shift the speed selector lever into Position R2.
Rotate the  lower link arm  fully upward
(counterclockwise) (Figure 7).
Figure7
6.
Lift up on the speed control rod and insert the trunnion
into the hole in the speed selector lever (Figure 6).
Figure9
1.
Shortrod
2.
Longchutecontrolrod
7
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38621
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number260000001 - 260999999
Product NameToro Power Max 826 LE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath26 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type26 oz. (.8l) 5w-30 or 10w / API SH or higher
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Size318cc
Engine Motor Type4 Cycle CARB2, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website