Important: All electrical repairs should be
performed only by an Authorized Service Dealer.
Note: Determine the left and right sides of the machine
from the normal operating position.
If the extension cord is plugged into the
snowthrower, someone could accidentally operate
snowthrower while you are performing maintenance
on it, causing serious personal injury.
Use a 5/16 inch Allen wrench to turn the rotor shaft
clockwise (left-hand thread) while holding the rotor
Disconnect the extension cord before you perform
You do not need to lubricate the snowthrower; all the
bearings were lubricated at the factory for the life of the
Note: You may need to tap the Allen wrench with a
hammer to loosen the rotor shaft. Wedge a stick or a
hammer handle in the rotor to prevent it from rotating.
The scraper is located at the bottom of the rotor housing
as shown in Figure 12.
Note: If you cannot remove the rotor shaft by holding
the rotor, remove the left side cover and the skid (Figure
Remove the 2 screws that secure the scraper to the
snowthrower (Figure 12).
Install the new scraper and fasten it securely with 2
3. Hold the hex nut with a 7/8 inch wrench while
unscrewing the rotor shaft (Figure 16).
Remove the 3 screws that secure the right side cover
and the skid to the snowthrower frame (Figure 13).
|Categories||Snow Blower Manuals, Toro Snow Blower|
|Tags||Toro 1800 Power Curve, Toro 38026|
|Model Year||2007. 2008, 2009|
|Document Type||Operator's Manual|
|Serial Number||290000001 - 290001000|
|Product Name||1800 Power Curve Snowthrower|
|Product Brand||Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
|Engine Motor Size||7.3 amp|
|Engine Motor Type||230 VAC|
|Document File Type|
|Wikipedia's Page||Toro Company|
(0 votes, average: 0 out of 5)