MovingtheChuteDeector
moving parts to stop, and remove all ice and snow from
the snowthrower.
Hold the blue trigger cap down and move the Quick Stick
forward to lower the chute deflector; move it rearward to
raise the chute deflector (Figure 38).
•
With the engine off, pull the recoil starter handle several
times to prevent the recoil starter from freezing up.
OperatingTips
When the snowthrower is in operation, the impeller
and auger can rotate and cut off or injure hands and
feet.
•
Before adjusting, cleaning, inspecting,
troubleshooting, or repairing the snowthrower,
stop the engine and wait for all moving parts
to stop. Disconnect the wire from the spark
plug and keep it away from the plug to prevent
someone from accidentally starting the engine.
Figure38
Unclogging theDischarge
Chute
•
Remove an obstruction from the discharge
chute; refer to Unclogging the Discharge Chute.
If necessary, use the snow cleanout tool, not
your hands, to remove an obstruction from the
discharge chute.
If the auger/impeller is running but there is no snow
coming out of the discharge chute, the discharge chute may
be clogged.
•
To unclog the discharge chute, stay in the operating
position and release the left hand (traction) lever. While
running the auger/impeller, push down on the handles
to raise the front of the snowthrower a few inches
(centimeters) off the pavement. Then lift the handles
quickly to bump the front of the snowthrower on the
pavement. Repeat if necessary until a stream of snow
comes out the discharge chute.
•
•
Stay behind the handles and away from
the discharge opening while operating the
snowthrower.
Keep face, hands, feet, and any other part of your
body or clothing away from concealed, moving,
or rotating parts.
•
If you cannot unclog the discharge chute by bumping
the front of the snowthrower, stop the engine, wait
for all moving parts to stop, and use the snow
cleanout tool; never use your hand.
The rotor blades can throw stones, toys, and other
foreign objects and cause serious personal injury to
the operator or to bystanders.
Important: Unclogging the discharge chute
by bumping the front of the snowthrower on the
pavement may cause the skids to move. Adjust the
skids and tighten the skid bolts securely.
•
Keep the area to be cleared free of all objects that
the rotor blades could pick up and throw.
•
Keep all children and pets away from the area
of operation.
PreventingFreeze-up
•
•
•
Always set the throttle to the Fast position when
throwing snow.
•
In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive force
when trying to operate frozen controls. If you have
difficulty operating any control or part, start the engine
and let it run for a few minutes.
If the engine slows down under a load or the wheels
slip, shift the snowthrower into a lower gear.
If the front of the snowthrower rides up, shift the
snowthrower into a lower gear. If the front continues to
ride up, lift up on the handles.
•
After using the snowthrower, let the engine run for
a few minutes to prevent moving parts from freezing.
Engage the auger/impeller to clear any remaining snow
from inside the housing. Rotate the Quick Stick to
prevent it from freezing. Stop the engine, wait for all
15
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38631, Toro Power Max 828LXE |
| Model Number | 38631 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Name | Toro Power Max 828 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)