InspectingandReplacingthe
SparkPlug
Use a Champion RJ-19LM or equivalent spark plug. Check
and gap the spark yearly, and replace the plug if necessary.
1.
2.
3.
Clean around the base of the spark plug.
Remove the spark plug.
Examine the spark plug and replace it if it is cracked,
fouled, dirty, or if the electrodes are worn.
Important: Do not clean the electrodes because
grit could enter the cylinder and damage the
engine.
Figure53
1.
Cableconduit
2.
Cableclamp
3.
Grasp the cable conduit and move it toward the front of
the machine until the discharge chute latch fully engages
the gear teeth (Figure 53 and Figure 54).
4.
Set the gap between the electrodes on the spark plug at
0.030
inch (0.76 mm) (Figure 51).
Figure51
1.
0.030inch(0.76mm)
5.
Install the spark plug by hand and then torque it to 15
ft-lb (20.4 N·m).
Figure54
Note: If you do not have a torque wrench, tighten
the plug firmly.
1.
Dischargechutelatch
2.
Gearteeth
Note: The latch is spring loaded and will naturally
move into the teeth of the gear (Figure 54).
AdjustingtheDischargeChute
Latch
4.
5.
Remove any slack in the cable by pulling the cable
conduit rearward.
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
Tighten the bolt on the cable clamp.
6. Install and secure the gear cover.
1.
Remove the fastener on the gear cover (Figure 52), lift
the front of the cover up, and slide it back and out of
the way.
ReplacingtheDriveBelts
If the auger/impeller drive belt or the traction drive belt
becomes worn, oil-soaked, or otherwise damaged, go to
www.Toro.com for additional service information or have
an Authorized Service Dealer replace the belt.
Figure52
2.
Loosen the bolt on the cable clamp (Figure 53).
20
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38631, Toro Power Max 828LXE |
| Model Number | 38631 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Name | Toro Power Max 828 LXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)