GENERAL SAFETY PRECAUTIONS
What to do if lubrication does not work:
Chain drive sprocket
•
Check that the oil channel in the bar is not obstructed.
Clean if necessary.
Regularly check the degree of wear on the drive sprocket.
Replace if wear is excessive.
•
•
Check that the oil channel in the gear housing is
clean. Clean if necessary.
Bar
Check that the bar tip sprocket turns freely.If the chain
lubrication system is still not working after carrying out
the above checks you should contact your service
workshop.
Check regularly:
•
Whether there are burrs on the edges of the bar.
Remove these with a file if necessary.
Checking wear on cutting equipment
Chain
•
•
Whether the groove in the bar has become badly
worn. Replace the bar if necessary.
Whether the tip of the bar is uneven or badly worn. If
a hollow forms on the underside of the bar tip this is
due to running with a slack chain.
Check the chain daily for:
•
•
•
Visible cracks in rivets and links.
Whether the chain is stiff.
Whether rivets and links are badly worn.
•
To prolong the life of the bar you should turn it over
daily.
We recommend you compare the existing chain with a
new chain to decide how badly the existing chain is worn.
When the length of the cutting teeth has worn down to
only 4 mm the chain must be replaced.
WARNING! A faulty cutting attachment
may increase the risk of accidents.
!
14
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 327P4, Husqvarna 327P5, Husqvarna X-Series |
| Model Year | 2008, 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)