ASSEMBLY
Fitting the cutting head
The chain should be tensioned until it fits snugly on the
underside of the bar.
•
Fit the cutting head on the shaft so that the screw (A)
is aligned with the hole in the shaft as shown.
•
•
Tighten screw A.
Tighten screw B.
B
•
The chain is correctly tensioned when there is no
slack on the underside of the bar, and it can still be
turned easily by hand. Tighten the bar nut with the
combination spanner while holding up the tip of the
bar.
A
CAUTION! Make sure that the drive shaft inside the shaft
engages with the cut-out in the cutting head.
Fitting the bar and chain
•
When fitting a new chain, the chain tension has to be
checked frequently until the chain is run-in. Check the
chain tension regularly. A correctly tensioned chain
ensures good cutting performance and long life.
Unscrew the bar nut and remove the protective cover.
Fit the bar over the bar bolt. Place the bar in its rearmost
position. Place the chain over the drive sprocket and in
the groove on the bar. Begin on the top side of the bar.
Adjusting the harness
Make sure that the edges of the cutting links are facing
forward on the top edge of the bar.
Fit the cover and locate the chain adjuster pin (A) in the
hole in the bar. Check that the drive links of the chain fit
correctly on the drive sprocket (B) and that the chain is in
the groove in the bar (C). Tighten the bar nut finger-tight.
You should always use the harness with the machine to
give maximum control over the machine and reduce the
risk of fatigue in your arms and back.
•
•
•
Put on the harness.
Hook the machine onto the harness support hook.
Adjust the length of the harness so that the support
hook is roughly level with your right hip.
Tension the chain by turning the chain tensioning screw
clockwise. Use a combination spanner or turn by hand.
English – 15
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 327P4, Husqvarna 327P5, Husqvarna X-Series |
| Model Year | 2008, 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)