Toro Power Clear 38581 38582 Snow Blower Operators Manual 2008

Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Maintenance Procedure
Interval
Check the control cable and adjust it if necessary.
Check for loose fasteners and tighten them if necessary.
After the first  hour
Check the control cable and adjust it if necessary.
Inspect the rotor blades and have an Authorized Service Dealer replace the rotor
blades and scraper if necessary.
Yearly
Service the spark plug and replace it if necessary.
Check for loose fasteners and tighten them if necessary.
Have an Authorized Service Dealer inspect the drive belt and replace it if necessary.
Yearly or before storage
•  Prepare the snowthrower for storage.
Adjusting the Control Cable
Important: The control cable must contain some
slack when you disengage the control bar for the
rotor blades to stop properly.
Checking the Control Cable
Service Interval:  After the  first hour—Check
the control cable and adjust it if
necessary.
Adjusting the Control Cable
1.
Slide up the spring cover and unhook the spring
from the adjuster link (Figure 21).
Yearly—Check the control cable and
adjust it if necessary.
Move the control bar back toward the handle to remove
the slack in the control cable (Figure 20).
Figure 21
1.
Adjuster link
Z-fitting
3.
4.
Spring cover
Figure 20
2.
Unhook the spring here.
1.
Control bar
2.
1/16-inch to 1/8-inch (2
mm to 3 mm) gap
Note: You can pull up the adjuster link and cable to
make unhooking the spring easier.
Note: Ensure that a 1/16-inch to 1/8-inch (2 mm to 3
mm) gap exists between the control bar and the handle
(Figure 20).
2.
Move the Z-fitting to a higher or lower hole on the
adjuster link as needed to obtain the 1/16-inch to
1/8-inch
(2 mm to 3 mm) gap between the control
bar and the handle (Figure 20).
11
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38581, 38582
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number280000001 - 280999999
Product NameToro Power Clear Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesPower Clear, Snowthrower
Swath21 inch
DischargeSingle Stage
Engine ManufacturerBriggs & Stratton
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Engine Motor Model #0842330199E8
Engine Motor Size141cc
Engine Motor Type2 Cycle EPA2
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Clear 38581 38582 Snow Blower Operators Manual 2008 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Power Clear 38581 38582 Snow Blower Operators Manual 2008 SKU UPC Model
mike on Jan 11, 2015. 221 r snowblower

Very Easy To Start In The Worst Conditions. Have Had This Machine For 7 Years. A Real Work Horse. Removing Snow With This Machine Is A Walk IntThe Park. Love it.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website