Replacing the Drive Belt
Note: Route the new drive belt first around the
engine pulley, then the idler pulley, and finally around
the loose rotor pulley positioned just above the rotor
shaft (Figure 27).
If drive belt becomes worn, oil-soaked, excessively
cracked, frayed, or otherwise damaged, replace the belt.
1.
Remove the drive belt cover by removing the 3 bolts
as shown in Figure Figure 27.
6.
7.
Install the rotor pulley onto the rotor shaft
(Figure 27).
Install the curved washer and the rotor pulley bolt
and tighten them securely (Figure 27).
Note: The concave side of the curved washer goes
against the outside of the pulley.
8.
9.
Install the brake spring onto the idler arm (Figure 28).
Install the drive belt cover with the bolts you
removed in step 1.
Note: Ensure that the drive belt is properly adjusted
and operating; refer to Checking the Control Cable
and Adjusting the Control Cable.
Figure 27
1.
2.
Drive belt cover
Bolt (3)
6.
7.
Drive belt
Rotor shaft
3.
Rotor pulley bolt
8.
Brake spring (unhook from
idler arm here)
4.
5.
Curved washer
Rotor pulley
9.
Idler pulley
10.
Engine pulley
2.
Unhook the brake spring from the idler arm to
release the belt tension (Figure 27).
3.
4.
5.
Remove the screw and curved washer that holds the
rotor pulley (Figure 27).
Remove the rotor pulley and the drive belt
(Figure 27).
Install the new drive belt, routing it as shown in
(Figure 28).
Figure 28
1.
Brake spring (install on
idler arm here)
3.
4.
Engine pulley
Rotor pulley
2.
Idler pulley
14
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38581, Toro 38582 |
Model Number | 38581, 38582 |
Model Year | 2008 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 280000001 - 280999999 |
Product Name | Toro Power Clear Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Power Clear, Snowthrower |
Swath | 21 inch |
Discharge | Single Stage |
Engine Manufacturer | Briggs & Stratton |
Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
Engine Motor Model # | 0842330199E8 |
Engine Motor Size | 141cc |
Engine Motor Type | 2 Cycle EPA2 |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro Power Clear 38581 38582 Snow Blower Operators Manual 2008 5.0 out of 5.0 based on 1 product reviews.
Very Easy To Start In The Worst Conditions. Have Had This Machine For 7 Years. A Real Work Horse. Removing Snow With This Machine Is A Walk IntThe Park. Love it.