Poulan Pro PP400E Chainsaw Owners Manual

MAINTENANCE
CUSTOMER RESPONSIBILITIES
WARNING:  Disconnect power source before performing maintenance.
Fill in dates as you complete
regular service
Before
Use
After
Use
Every
15 min.
Service
Dates
Check for damaged/worn parts
n
Check for loose fasteners/parts
Check chain tension
n
n
n
Check chain sharpness
Check guide bar
n
n
Check bar and chain oil level
Inspect and clean unit & labels
Clean guide bar groove
n
n
n
GENERAL RECOMMENDATIONS
The warranty on this unitdoes notcover
items that have been subjected to oper-
ator abuse or negligence.To receive full
value  from the  warranty, the  operator
must maintain unit as instructed  in this
manual. Various adjustments will need
to  be  made   periodically  to  properly
maintain  your  unit.  Improper  mainte-
nance may  cause damage to  the unit
and possible injury to the operator orby-
standers.
CHECK CHAIN TENSION
WARNING:
Wear
protective
gloves when handling chain. The chain
is sharp and can cut you even when it is
not moving.
Chain tension  is very  important.  Chain
stretches during use.   This is  especially
trueduringthe  firstfew timesyou useyour
saw.  Always  check chain tension  each
time you use your saw.
1.  Unplug unit from the power source.
2.
Use  a  screwdriver to  move  chain
around guide bar to ensure kinks do
not exist.  The  chain should  rotate
freely.
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for
replacement of worn or damaged parts.
NOTE: It is normal for a small amountof
oil to appear under the saw after motor
stops.Do notconfuse this with a leaking
oil tank.
S Trigger  Switch  --   Ensure  the  trigger
switch functions properly by squeezing
and  holding the  trigger  switch. Make
sure motor starts and stops.
NOTE: It is recommended that the saw
be   turned    upside   down   for   chain
tensioning.
3.  Loosen bar clamp nuts until they are
finger tight against the bar clamp.
4.  Turn  the  adjusting screw  clockwise
until the chain solidly contacts bottom
of guide bar rail. Then, turn adjusting
screw an  additional 1/4 turn.  This is
correct chain tension setting.
S Oil Tank -- Discontinue use ofchainsaw
if oil  tank shows  signs of  damage or
leaks.
S Extension  Cord  --  Discontinue  use if
chain saw extension cord shows signs
of damage or wear.
CHECK FOR LOOSE FASTENERS
Adjusting Screw -- 1/4 Turn
AND PARTS
S Bar Clamp Nuts
S Chain
S Bar Adjusting Screw
NOTE: To tighten the chain, turn the ad-
justing  screw  clockwise; to  loosen  the
chain, turn  the adjusting screw counter-
clockwise.
12
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website