STORAGE
SEASONAL STORAGE
WARNING: Perform the following
Prepare yourunit for storage at the end of
the season or if it will not be used for 30
days or more.
steps after each use:
S Allow motor to cool before storing or
transporting.
If your chain saw is to be stored for a
period of time:
S Store chain sawand extensioncord ina
well ventilated area
S Clean it thoroughly before lengthy stor-
age.
S Store chain saw with all guards in place
and position chain saw so that
any sharp object cannot accidentally
cause injury.
S Store in a clean dry area.
S Lightly oil external metal surfaces and
guide bar.
S Store chain saw unplugged, well out of
the reach of children.
S Oil the chain and wrap it in heavy
paper or cloth.
TROUBLESHOOTING TABLE
WARNING: Always stop unit and disconnect from the power source be-
fore performing all of the recommended remedies below except remedies
that require unit to be operating.
TROUBLE
CAUSE
REMEDY
Chain does 1. Chain tension incorrect. 1. See “Check Chain Tension” in
not move
Maintenance section.
when trigger 2. Guide bar rails pinched. 2. Repair or replace.
switch is
engaged.
3. Trigger switch failure.
3. Contact an authorized service
dealer.
Circuit breaker tripped/ 4. Reset circuit breaker or replace
fuse.
4.
fuse failure.
Chain clat-
ters or cuts
roughly.
1. Chain tension incorrect. 1. See “Check Chain Tension” in
Maintenance Section.
2. Cutters damaged.
2. Contact an authorized service
dealer.
3.
4.
Chain worn.
3. Resharpen or replace chain.
Cutters dull, improperly 4. See “Chain Sharpening” in
sharpened, or depth
gauges too high.
Sprocket worn.
Service and Adjustments section.
5.
5. Contact an authorized service
dealer.
Chain stops 1. Chain cutter tops not
1. See “Chain Sharpening” in
Service and Adjustments section.
2. Repair or replace guide bar.
during cut.
filed flat.
2.
Guide bar burred or
bent; rails uneven.
Oil inade-
1. Oil tank empty.
1. Fill oil tank.
quate for bar 2. Oil outlet clogged.
and chain
2. Contact an authorized service
dealer.
lubrication.
3. Guide bar oil hole
blocked.
3. Remove bar and clean.
Chain cuts
at an angle.
1. Cutters damaged on
one side.
1. See “Chain Sharpening” in
Service and Adjustments section.
2.
Chain dull on one side. 2. See “Chain Sharpening” in
Service and Adjustments section.
3.
Guide bar bent or worn. 3. Replace guide bar.
16
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP400E |
| Model Year | 2010 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)