frame with the bolt and washer, the small spacer,
and locknut (M8–1.25) (Figure 9). Ensure the bolt
is installed from the inside of the frame as shown
in Figure 9.
3.
4.
Install a washer (M8) onto the large bolt (M8–1.25 x
100).
Install the spacer into the spring and install the large
bolt (M8–1.25 x 100) into the spacer.
Important: When installing the spring, place
one end of the spring under the rear frame
(Figure 9).
Figure 10
1.
2.
Spring
3.
4.
Nut runner
Spring end under the
frame
Move the spring end under
the kickstand spacer.
5.
Install the left side of the kickstand to the frame
with the bolt and washer, the large spacer and spring,
and locknut (M8–1.25) (Figure 9). Ensure the bolt
is installed from the inside of the frame as shown
in Figure 9.
4
Adjusting the Handle
No Parts Required
Procedure
1.
Remove hairpin cotters from ring pins on each side
of mower (Figure 11).
Figure 9
1.
Left handle end
5.
Large bolt (M8–1.25 x
100)
2.
3.
4.
Locknut (M8–1.25)
Small spacer
6.
7.
8.
Spring
Large spacer
Washer (M8)
Ssmall bolt (M8–1.25 x
030)
Figure 11
6.
Place a nut runner over the end of the spring pointing
towards the rear and move the end of the spring over
and under the kickstand spacer (Figure 10).
1.
Ring pins
2.
3.
While supporting handle, remove ring pins from
each side and raise or lower handle to desired
operating position (Figure 11).
Reinstall ring pins and hair pin cotters.
12
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 04019, Toro 04024, Toro 04025, Toro Greensmaster |
Model Year | 2011 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)