Traction Drive Belt
1.
Remove belt cover mounting fasteners and belt
cover to expose belt (Figure 44).
Figure 46
1.
Tang washer
2.
Idler bracket bolt
B. Using a 3/8 inch drive torque wrench, rotate the
idler bracket with 35-40 in.-lb. of torque to set
the belt tension (Figure 47). While holding the
torque wrench setting, tighten the idler bracket
mounting bolt (The tang washer is installed
to prevent the belt from slipping.). Do not
over-tension the belt.
Figure 44
1.
Traction drive belt cover
2.
Check tension by depressing belt (Figure 45) at mid
span of pulleys with 4 ± 1 lb of force. Belt should
deflect 3/16 to 5/16 inch (4.8 to 7.9 mm). If the
deflection is incorrect, proceed to next step.
Figure 47
Figure 45
1.
2.
Traction drive belt
Idler bracket
3.
3/8 inch Torque wrench
here
1.
Traction drive belt
3.
To adjust belt tension:
C. Install the belt cover.
A. On back side of side plate, loosen the bolt
securing the idler bracket to the side plate
(Figure 46).
30
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04019, Toro 04024, Toro 04025, Toro Greensmaster |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)