Inspecting the Rotor Blades
4.
5.
After draining the used oil, return the machine to the
operating position.
Service Interval: Yearly—Inspect the rotor blades and
have an Authorized Service Dealer
Install the oil drain plug and tighten it securely.
replace the rotor blades and scraper if 6. Clean around the oil fill cap (Figure 30).
necessary.
Before each session, inspect the rotor blades for wear.
When a rotor blade edge has worn down to the wear
indicator hole, have an Authorized Service Dealer
replace the rotor blades and the scraper (Figure 28).
Figure 30
1.
Oil fill cap
7.
Unscrew the oil fill cap and remove it (Figure 30).
8.
With the machine in the operating position, carefully
pour oil into the oil fill hole. Wait three minutes,
then add oil to the point of overflow (Figure 32).
Figure 28
1.
The wear indicator hole is
intact; you do not need to
replace the rotor blades.
2.
The wear indicator hole is
exposed; replace the rotor
blades.
Max fill: 20 oz. (0.6 l), type: automotive detergent oil
with an API service classification of SJ, SL, or higher.
Use Figure 31 below to select the best oil viscosity
for the outdoor temperature range expected:
Changing the Engine Oil
Service Interval: After the first 2 hours
Yearly
Run the engine a few minutes before changing the oil
to warm it. Warm oil flows better and carries more
contaminants.
1.
Siphon the fuel from the fuel tank into an approved
fuel container, or run the engine until it stops.
2.
3.
Move the machine to a level surface.
Place an oil drain pan under the oil drain plug,
remove the oil drain plug, and tip the machine
backward and drain the used oil in the oil drain pan
Figure 29).
Figure 31
1.
Using SAE 30 at outdoor
temperatures below 40°F
2.
Using 10W-30 at outdoor
temperatures above
(4°C)
starting.
will result in hard
80°F (27°C) may result in
increased oil consumption;
therefore, check the oil
level more frequently in
these circumstances.
Note: 0W30 synthetic oil is acceptable for use in
cold temperatures.
Figure 29
15
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38567, Toro 38569, Toro CCR 6053 R Quick Clear |
| Model Number | 38567, 38569 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001 - 311999999 |
| Product Name | Toro CCR 6053 R Quick Clear Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Quick-Clear, Snowthrower |
| Swath | 21 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | 20 oz. (.6 L) 5w-30 synthetic or 5w-30 below 40F (4c) or 10w-30 above 0F (-20c) |
| Engine Motor Model # | 115-0667 |
| Engine Motor Size | 163cc |
| Engine Motor Type | 4 Cycle CARB3 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)