Adjusting the Quick Shoot™
Control
If there is more than 1/2 inch (13 mm) of slack in the
Quick Shoot cable (Figure 37) or the discharge chute
does not rotate left and right in equal angles, adjust the
Quick Shoot control cables.
Figure 39
1.
Arrows
3.
Rotate the discharge chute so that it faces straight
ahead and the arrow on the back of the discharge
chute aligns with the arrow on the shroud (Figure 40).
Figure 37
1.
1/2 inch (13 mm) maximum slack
1.
Loosen the two Quick Shoot control cable clamps
(Figure 38).
Figure 38
1.
Cable clamps
Figure 40
2.
Position the Quick Shoot control between the two
arrows located on the right hand side of the upper
handle (Figure 39).
4.
Hold the discharge chute in the straight-ahead
position, pull the lower cable casing downward until
you remove the slack in the cable, and tighten the
screw on the lower cable clamp securely (Figure 41).
18
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38567, Toro 38569, Toro CCR 6053 R Quick Clear |
| Model Number | 38567, 38569 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001 - 311999999 |
| Product Name | Toro CCR 6053 R Quick Clear Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Quick-Clear, Snowthrower |
| Swath | 21 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | 20 oz. (.6 L) 5w-30 synthetic or 5w-30 below 40F (4c) or 10w-30 above 0F (-20c) |
| Engine Motor Model # | 115-0667 |
| Engine Motor Size | 163cc |
| Engine Motor Type | 4 Cycle CARB3 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)