Toro 51986 Powervac Gas-Powered Blower Manual, 2012

ASSEMBLY
Unpacking
WARNING:
This product requires assembly.
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
WARNING:
Do not use this product if any parts on the Pack-
ing List are already assembled to your product
when you unpack it.  Parts on this list are not as-
sembled to the product by the manufacturer and
require customer installation.  Use of a product
that may have been improperly assembled could
result in serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug
when assembling parts.
Tools Needed
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
The following tool (not included or drawn to scale) is
needed for assembly:
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
Flat Head Screwdriver
1-866-574-9242
(US) or 1-866-574-9243 (Canada) for
assistance.
Packing List
Blower
Assembling the Blower Tubes
See Figure 3.
Grounding Wire
Upper Blower Tube
Sweeper Nozzle
Vacuum Handle
1.
2.
3.
Align raised tabs on main housing to the slots on upper
tube; slide together and tighten securely by twisting.
Check tightness after initial run and retighten if needed.
Secure the sweeper nozzle and upper blower tube
together by aligning the raised locking tab on the upper
blower tube with the raised slot on the sweeper nozzle.
Vacuum Handle Knobs (2)
Upper and Lower Vacuum Tubes
Vacuum Tube Screws (2)
Vacuum Bag Assembly
To disassemble, rotate the tube and nozzle to unlock
them and remove from the main housing outlet.
Vacuum Bag Adaptor
Main Housing
Outlet
2-Cycle
Engine Lubricant
Operator’s Manual
Raised
Locking Tab
Note: Read and remove all hang tags and store with your
operator’s manual.
WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
Raised
Locking
Tab
Upper Blower
Tube
Sweeper
Nozzle
Figure 3
Assembly
11
Product Specification
CategoriesBlower Vacuum and Sweeper Manuals, Toro Blower and Vacuum Manuals
Tags
Model Number51986
Model Year2012
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 76 pages
Document TypeOperator's Manual
LanguageEnglish, Français, Español
Serial Number312000001 - 312999999
Product NamePowervac Gas-Powered Blower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Blowers, Vacuums
Product TypeBlower, Vacuum
Product SeriesBlower, Hand Held Gas Powered
Discharge150 mph/375 cfm
Engine ManufacturerOWT/TTI
Engine Motor Size25cc
Engine Motor Type2 Cycle
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website