SERVICE AND ADJUSTMENTS
2.
Adjust runners by inserting a spacer of
desired thickness under center of scraper
blade, loosen runner hardware, slide
runners to flat surface. Allow 1/8 in.
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
(3
mm) between scraper blade and hard
DISCHARGE CHUTE DEFLECTOR
Deflector must stay in selected position while
throwing snow.
To adjust, loosen then retighten hardware to
smooth surfaces. Allow 1-1/4 in. (30 mm)
between scraper blade and uneven or
gravel surfaces. Retighten hardware.
NOTE: Keep housing level by adjusting
runners equally.
desired deflector drag force (Figure 11).
Adjusting
Hardware
2
1
. Runner
Discharge Chute
Deflector
1
OS0486
2.
Runner Hardware
Figure 11
Figure 13
OS0113
DISCHARGE CHUTE
SCRAPER BLADE
If chute does not stay in position while
operating, tighten nut on carriage bolt at pivot
point to increase tension on spring
(Figure 12).
IMPORTANT: Damage to auger/impeller
housing will result if blade wears down too far.
Scraper blade is adjustable to compensate for
wear.
To adjust scraper blade:
1.
2.
3.
Tip unit back onto handlebar, support
housing and loosen nuts retaining blade.
Adjust runners to fully raised position
(housing closest to ground).
Reposition scraper blade flush with
runners and tighten lock nuts.
1
2
3
SHEAR BOLTS
IMPORTANT: Use only Ariens shear bolts for
replacement. Use of any other type of shear
bolt may result in severe damage to unit.
Occasionally a foreign object may enter the
auger/impeller housing and jam the auger,
breaking shear bolts (Figure 14) which secure
the auger to the shaft. This allows auger to
turn freely on the shaft preventing damage to
gear drive.
4
OS0115
1.
2.
3.
4.
Pinion
Chute Gear
Carriage Bolt
Spring
Figure 12
RUNNERS
For Replacement:
1.
Slide auger outward against roll pin and
align hole in shaft with hole in auger
(holes in shaft for roll pins and shear bolts
line up).
Runners should be adjusted as conditions
require (Figure 13).
1.
Position unit on a hard, flat, smooth level
surface.
GB - 20
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 932036-524, Ariens 932037-724, Ariens 932504-524, Ariens 932505-724 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)