McCulloch MS4016PAVCC MS4018PAVCC Professional Chainsaw Owners Manual

4
- FUEL AND LUBRICATION
4-1.
FUEL
FUEL MIXING TABLE
Use regular grade  unleaded gasoline mixed with  Genuine
Factory  Parts  40:1   custom  2-cycle  engine  oil  for   best
results. Use mixing ratios in Section 4-3.
Never  use  straight  gasoline  in   your  unit.  This  will
cause permanent engine damage and void  the manu-
facturer’s warranty  for that product. Never  use a fuel  mix-
ture that has been stored for over  90 days.
If 2-cycle  lubricant other  than Genuine Factory  Parts
Custom Lubricant is to be used, it  must be a premium
grade  oil for  2-cycle air  cooled  engines mixed  at  a 40:1
ratio. Do not use any 2-cycle oil product with a recommend-
ed  mixing ratio  of  100:1.  If  insufficient lubrication  is  the
cause  of   engine  damage,   it  voids  the   manufacturer’s
engine warranty for that occurrence.
4-4.RECOMMENDED
FUELS
Some conventional gasolines  are being blended with  oxy-
genates  such as  alcohol or  an  ether compound  to  meet
clean air standards. Your McCulloch engine  is designed to
operate satisfactorily on any gasoline intended for automo-
tive use including oxygenated gasolines.
4-2.
MIXING FUEL
Mix fuel with Genuine Factory Parts brand 2  cycle oil in an
approved  container. Use  mixing table  for  correct ratio  of
fuel to oil. Shake container to ensure  thorough mix.
Lack of lubrication voids engine warranty.
4-5.CHAIN
AND BAR LUBRICATION
Always refill  the chain  oil tank  each time  the  fuel tank  is
refilled.  We   recommend  using   Genuine  Factory   Parts
Chain, Bar  and Sprocket  Oil, which  contains additives  to
reduce friction and  wear and to assist in  the prevention of
pitch formation on the bar and chain.
4-3.FUEL
AND LUBRICATION SYMBOLS
Gasoline  and   Oil
Mix 40:1
Oil Only
9
Product Specification
CategoriesChainsaw Manuals, McCulloch Chainsaw Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 64 pages
LanguageEnglish
Product BrandMcCulloch. Support Phone for US: Wheeled (Mowers, Tractors, Tillers, Snow Throwers) - 1-800-849-1297
McCulloch Handheld (Chainsaws, Trimmers, Blowers, Edgers) - 1-800-554-6723 All McCulloch Products - 1-800-521-8559, Chainsaw
Document File TypePDF
Publishermcculloch.com
Wikipedia's PageMcCulloch Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website