3
5.
Insert post on
cable tie into
hole provided
on the lower
handle. Pull
cable tie
A
tight and trim
excess. See
Figure 3-5.
Setup and
Adjustments
C
Figure 3-5
B
2
Figure 3-7
1
NOTE: Make certain
bag is turned right side
out before assembling
(warning label will be on
the outside).
3
B
NOTE: Make certain
cables are routed to the
outside of the handle so
they are not in the way
when attaching the grass
catcher.
A
Figure 3-6
6.
7.
Each wheel has a height adjustment lever to change
the cutting height of the mower. To change the height
of cut, squeeze adjuster lever toward the wheel,
moving up or down to selected height. See Figure 3-6.
To assemble the grasscatcher:
a. Place bag over frame (black plastic side is the
bottom of bag.) Insert the hooks on the frame
through the holes in the side plastic channels of
the bag. See Figure 3-7.
Figure 3-8
WARNING
b. Secure bag to frame by working the plastic chan-
nels on bag over frame as shown in Figure 3-7. All
of the plastic channels except center top of bag
attach from the outside of bag. Center top of bag
attaches from the inside of bag.
Never operate mower
unless the hooks on
the grass catcher are
firmly seated on the
pivot rod, and the
rear discharge door
rests firmly against
top of the grass
A
8.
9.
Attaching Grass Catcher to Mower
B
a. Lift the rear discharge door on the mower, and
place the grass catcher on the pivot rod. Let go
of discharge door so that it rests on the grass
catcher. See Figure 3-8.
catcher.
Figure 3-9
To remove grass catcher and utilize the mulching
All mowers are
feature:
a. Onmulchingthe sideplug.of theSeemowerFiguredeck,3-9. lift the hinged
equipped with a rear
protective guard. The
guard helps eliminate
projectiles thrown
by the blade from
injuring the operator.
DO NOT REMOVE
THIS GUARD.
a. Lift rear discharge door on the mower as shown in
Figure 3-8. Lift grass catcher up and out, off of the
pivot rod. Release rear discharge door to allow it to
close rear opening of mower.
b. Slide the two hooks on the side discharge deflec-
tor under the hinge pin on the hinged mulching
plug assembly. Lower the hinged mulching plug.
10.
The side discharge is an optional feature.
NOTE: Do not remove the hinged mulching plug at any
If converting to side discharge, make sure grass
catcher is off unit and rear discharge door is closed.
time, even when you are not mulching.
Categories | Lawn Mower Manual, MTD Lawn Mower Manuals |
---|---|
Tags | MTD 56M |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | MTD, Lawn Mower |
Document File Type | |
Publisher | mtdproducts.com |
Wikipedia's Page | MTD Products |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)