6
Maintaining
Your Snow
Thrower
Auger Belt Replacement
To remove and replace your snow thrower’s auger belt,
proceed as follows:
1
1.
Remove the plastic belt cover on the front of the
engine by removing the two self-tapping screws.
NOTE:place aDrainpiecetheof plasticgasolineunderfromthethegassnowcap.thrower, or
2
. Carefully pivot the snow thrower up and forward so
that it rests on the auger housing. Remove the frame
cover from the underside of the snow thrower by
removing four self-tapping screws which secure it.
3.
4.
Roll the auger belt off the engine pulley.
a. Loosen and remove the shoulder screw which
acts as a belt keeper.
2
b. Unhook the support bracket spring from the
frame.
5.
Remove the belt from around the auger pulley, and
slip the belt between the support bracket and the
auger pulley. Reassemble auger belt by following
instructions in reverse order.
NOTE: Although
multi-viscosity oils
(5W30,
10W30 etc.)
NOTE: Do NOT forget to reinstall the shoulder screw
and reconnect the spring to the frame after installing a
replacement auger belt.
improve starting in cold
weather, these multi-
viscosity oils also result
in higher oil consump-
tion when used above
32ºF.
Check your snow
3
thrower’s engine oil
level more frequently to
avoid possible engine
damage from running
low on oil.
NOTE: Do not sand-
blast spark plug. Spark
plug should be cleaned
by scraping or wire
brushing and washing
with a commercial
solvent.
4
5
IMPORTANT
NEVER replace the
auger shear pins with
standard pins. Any
damage to the auger
gearbox or other com-
ponents, as a result of
doing so, will NOT be
covered by your snow
thrower’s warranty.
15
Categories | Cub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | Cub Cadet WE 26, MTD Snow Blower Manual, MTD WE 26 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | MTD, Snow Blower |
Document File Type | |
Publisher | mtdproducts.com |
Wikipedia's Page | MTD Products |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)