MTD Troy-Bilt RZT Series 42 Inch Tractor Mower Deck Lawn Mower Owners Manual

Adjusting the Gauge Wheels
Insert the shoulder screw into the one of four index
holes in the front gauge wheel bracket that will give
the gauge wheel a 1/4 to 1/2 inch clearance with the
ground.
WARNING!: Keep hands and feet away from
the discharge opening of the cutting deck.
NOTE: The deck gauge wheels are an anti-scalp feature of
the deck and are not designed to support the weight of the
cutting deck.
Shoulder
Screw
Rear
Gauge
Wheel
The mower deck cutting height can be set in any of six
height settings using the tractor’s deck lift handle. The
deck heights range from 1-1/2” to 4”. The deck gauge
wheel position should be approximately 1/4 to 1/2 inch
above the ground when the deck is set in the desired
height setting.
Gauge
Wheel
Lock
Bracket
Nut
Using the lift handle, set the deck in the desired height
setting, then check the gauge wheel distance from the
ground below. If necessary adjust as follows:
Figure 6-8
Visually check the distance between the front gauge
wheels and the ground. If the gauge wheels are near
or touching the ground, they should be raised. If more
than 1/2” above the ground, they should be lowered.
Note the index hole of the just adjusted wheel, and
adjust the other gauge wheels into the respective
index holes of the other gauge wheel brackets on the
deck.
Remove the lock nut securing one of the front gauge
wheel shoulder screws to the deck. Remove the gauge
wheel and shoulder screw. Refer to Figure 6-8.
Maintenance Schedule
Before
Every
Every
Every
Every
Prior
Each use
10 Hours
25 Hours
50 Hours
100 Hours
to Storing
P
Check Engine Oil Level
P
Check Air Filter for Dirty,  Loose or Damaged Parts
P
P
Clean and Re-oil Air Filter’s Foam  Precleaner
Replace Air Filter Element
P
P
P
Change Engine Oil and Replace  Oil Filter
Clean Battery Terminals
P
P
P
P
P
P
Lube Front Pivot Axle and Caster  Axles
Clean Engine Cooling Fins
Lube Deck Wheels
P     P
P
Check Spark Plug Condition  & Gap
Replace Fuel Filter
sectiOn 6 — Maintenance & adjustMents
25
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals, Troy-Bilt Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website