MTD Troy-Bilt V560 Series 21 Inch Self Propelled Mulching Lawn Mower Owners Manual

3
Setup and
Adjustment
5.
Follow steps below to attach grass catcher:
a.   Lift rear discharge door.
6. If coverting to side discharge, make sure grass
catcher is off unit and rear discharge door is  closed.
a.   Lift mulching plug on the right side of mower.
b.   Place grass catcher on the pivot rod. Let go
of discharge door so that it rests on the grass
catcher. See Figure 3-5.
b.   Slide two hooks of side discharge chute under
the hinge pin on the mulching plug assembly  and
lower the side mulching plug. See Figure 3-6.
WARNING: Never operate  mower unless the
hooks on the grass catcher are firmly seated      time,NOTEeven: Do whennot remyouovearethenotsidmulching.e mulching  plug at any
on the pivot rod and the rear discharge  door
rests firmly against top of the grass catcher.
To remove grass catcher or convert to a mulcher (if
equipped), lift rear discharge  door on the mower. Lift
grass catcher up and off of the pivot rod. Release rear
discharge door to allow it to close rear opening of mower.
CUTTING HEIGHT
All wheels must be
placed in the same
position.
B
GRASS CATCHER
Make certain bag is
turned right side out
before assembling
(warning label will be
on the outside).
A
Figure 3-5
Figure 3-6
Adjustments
Cutting Height
Drive Control
The adjustment wheel is located in the drive control
handle housing and is used to tighten or loosen the
drive belt. You will need to adjust the drive control if
the mower does not propel itself with the drive control
engaged or if the mower’s wheels hesitate with the drive
control engaged. If either of these conditions  occur,
rotate adjustment wheel clockwise to tighten  cable or
counterclockwise to loosen the cable.  See Figure 3-8.
A cutting height adjustment lever is located at each
wheel. See Figure 3-7.
a.  Pull the lever out and away from the mower.
WARNING
b.  Moveheight.the lever forward or back for desired  cutting
Never operate mower
unless the hooks on
the grass catcher are
firmly seated on the
pivot rod and the rear
discharge door rests
firmly against top of
the grass catcher.
c.  Release lever towards mower deck.
2
1
3
Figure 3-
Figure3-8

Product Specification
CategoriesBlower Vacuum and Sweeper Manuals, Lawn Mower Manual, MTD Blower and Vacuum Manuals, MTD Lawn Mower Manuals, Troy-Bilt Blower and Vacuum Manuals, Troy-Bilt Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website