4
KnowYour Lawn Mower
Blade Control
Drive Control
Operating
Your Lawn
Mower
Recoil Starter
Cutting
Height
Adjustment
Levers
WARNING
Mulching Plug
The blade control
mechanism is a
safety device. Never
attempt to bypass its
operations.
Figure 4-1
Now that you have set up your lawn mower for opera-
Cutting Height Adjustment Levers
tion, get aquainted with its controls and features. These One adjustment lever is located on each wheel and is
are described below and illustrated on this page. This
knowledge will allow you to use your new equipment to
its fullest potential.
used to adjust the cutting height. All four levers have to
be at the same relative position to ensure a uniform cut.
Use extreme care
when handling
Recoil Starter
gasoline. Gasoline is
extremely flammable
and the vapors are
explosive. Never fuel
the machine indoors
or while the engine
is hot or running.
Extinguish cigarettes,
cigars, pipes and
other sources of
The recoil starter is attached to the right upper handle.
Stand behind the unit and pull the recoil starter rope to
start the unit.
Blade Control
The blade control is attached to the upper handle of
the mower. Depress and squeeze it against the upper
handle to operate the unit. Release it to stop engine and
blade.
Gas and Oil Fill-Up
1.
Check oil level and add oil if necessary. Follow engine
manual for this.
WARNING: This blade control mecha-
nism is a safety device. Never attempt
to bypass its operations.
2.
Service the engine with gasoline as instructed in the
engine manual. See Engine manual for location of oil
and gas fill.
Drive Control
WARNING: Use extreme care when han-
dling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
Never fuel the machine indoors or while
the engine is hot or running. Extinguish
cigarettes, cigars, pipes and other
sources of ignition.
WARNING: The operation of any lawn
mower can result in foreign objects
being thrown into the eyes, which can
damage your eyes severely. Always
wear safety glasses while operating
the mower, or while performing any
adjustments or repairs on it.
The drive control is located on the underside of the
upper handle and is used to engage the drive. Squeeze
it against the upper handle to engage the drive; release
it to slow down or stop mower from propelling. See
Figure 1.
ignition.
Keep hands and feet
away from the chute
area on cutting deck.
Refer to warning
Mulching Plug
The mulching plug is used only for mulching purposes.
Instead of collecting the grass clippings in the grass
catcher, your mower has the option of recirculating
the clippings back to the lawn. Make sure that the
rear discharge door is closed and the grass catcher is
removed from unit while mulching.
label on the unit.
8
| Categories | Blower Vacuum and Sweeper Manuals, Lawn Mower Manual, MTD Blower and Vacuum Manuals, MTD Lawn Mower Manuals, Troy-Bilt Blower and Vacuum Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Tags | MTD V560, Troy-Bilt V560 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)