MTD Yard Machines E762F Snow Blower Owners Manual

GEAR CASE
CHUTE CRANK
The  gear   case  is   lubricated  with   grease  at   the
factory    and     does    not    require     checking.    If
disassembled  for   any  reason,   relubricate  with   2
ounces  (do  NOT  overfill)  of  Shell  Alvania  grease
The  gear  on  the  end of  the  chute  crank  should be
greased with multi-purpose automotive grease once
a season.
EPR00,
part
number
737-0168.
Before
reassembling, remove old sealant and apply  Loctite
5699 or equivalent.
SECTION 10:  MAINTENANCE
WARNING: Disconnect
the
spark
Drive
plug   wire    and   ground    against   the
engine before performing any repairs or
maintenance.
Rear Auger
Belt
Belt
Engine
Pulley
AUGER BELTS
1.
Remove the plastic belt cover on the front of the
engine by removing the two self-tapping screws.
See Figure 22.
Front
Auger
Belt
Engine
Pulley
Idler
Pulley
Idler
Pulley
Figure 23  
Belt
Cover
Self-Tapping
Screws
8.
9.
Lift  the  rear  auger  belt  from  the  auger  pulley,
and  slip  belt  between  the  support  bracket  and
the  auger  pulley.  See  Figure  24.  Repeat  this
step for the front auger belt.
Replace  both   auger   drive  belts   by  following
instructions in reverse order.
Figure 22  
2.
3.
4.
5.
6.
7.
Drain  the  gasoline  from  the  snow  thrower,  or
place a piece of plastic under the gas cap.
Tip the snow thrower up and forward so that it
rests on the housing.
Remove four self-tapping screws from the frame
cover underneath the snow thrower.
Roll the front and rear auger belts off the engine
pulley. See Figure 23.
Unhook the idler spring from the hex bolt on the
auger housing. See Figure 24.
Back out the stop bolt to allow the belts to slip
between  the  bolt  and  auger  pulley.  See  Figure
25.
Support
Bracket
Rear
Auger
Belt
Front
Auger
Belt
Frame
Auger
Pulley
Support
Bracket
Spring
Idler
Auger
Spring   Housing
NOTE: It  may be necessary to   loosen the six nuts
that connect the frame to the auger housing to aid in
belt removal.
Figure 24  
15
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 30 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower, Yard Machines, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website