Regular Maintenance
MAINTENANCE SCHEDULE
MAINTENANCE REQUIRED
FREQUENCY
NOTES
Check / Lubricate Free-Hand Linkage.
Lubricate snowthrower.
10 Hours
10 Hours
Monthly
50 Hours;
Yearly
10W
Oil
10W
Oil and Grease
Check tire pressure.
20 psi (1.38 bar)
See Engine Manual
Change engine oil.*+
See Engine Manual
See page 24
Clean or replace spark plug.+
Check drive linkage/belt tension.
Lubricate Axle Shafts.
4-6 Hours
Yearly
Lithium Grease
Benalene Grease
Lithium Grease
Check auger gear case lubrication.**
Lubricate Auger Shaft.***
25 Hours
10 Hours
*
**
+
Change original oil after two hours of operation.
Check oil level each fall and spring.
See your engine Owner’s Manual.
***Lubricate
each fall and spring.
CHECKING TIRE PRESSURE
The air pressure in each tire (Figure 7) should be equal
for both tires for best performance. Be sure to keep caps
on valves to prevent entry of debris into the valve stem
when tires are filled.
Size
PSI
20
bar
1,38
,96
15 x 5.0-6
Figure 7. Checking Tire Pressure
16
x 4.8-8
14
AUGER GEAR CASE LUBRICATION
1.
2.
3.
Place the snowthrower on a level surface.
Remove the pipe plug (A, Figure 8).
Check the lubricant level. It should be level with the
lower edge of the plug opening. If not, add Benalene
grease.
Pipe Plug
4.
Re-install pipe plug, and tighten securely.
Figure 8. Auger Lubrication
A. Pipe Plug
18
| Categories | Simplicity Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Simplicity 10530, Simplicity 11532, Simplicity 8526, Simplicity 9528 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Simplicity, Snow Blower |
| Document File Type | |
| Publisher | simplicitymfg.com |
| Wikipedia's Page | Simplicity Outdoor |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)