Regular Maintenance
CHECK / LUBRICATE FREE-HAND
LINKAGE
Check the function of the Free-Hand controls: the con-
trols should function as described in the CONTROLS
section. It is critical for the safe operation of the unit
that the controls disengage when released.
Lubricate as shown in figure 13.
IMPORTANT NOTE
If the controls do not function properly, lubricate them. If
lubrication does not rectify the problem, see your dealer.
Under no circumstances should the unit be used if the
controls are not functioning properly.
Figure 13. Lubricate Free Hand Control
IMPORTANT NOTE
C
It is very important that grease fittings on the auger shaft
are lubricated regularly. If auger rusts to shaft, damage to
worm gear may occur if shear pins do not break.
B
A
LUBRICATING THE AUGER SHAFT &
ASSEMBLY
B
1.
2.
Remove cotter pin (C, Figure 14) and shear pin (B).
C
Use a grease gun and squirt several shots of grease
into grease fitting (A).
A
3.
Rotate auger assembly (D) several times to distribute
the grease evenly. Repeat step 2.
D
D
4.
5.
Reinstall shear pin (B) and cotter pin (C).
Repeat procedure for other side.
Figure 14. Lubricating the Auger Shaft Assembly
A. Grease Fittings
B. Shear Pins
C. Cotter Pins
D. Auger Assembly
20
| Categories | Simplicity Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Simplicity 10530, Simplicity 11532, Simplicity 8526, Simplicity 9528 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Simplicity, Snow Blower |
| Document File Type | |
| Publisher | simplicitymfg.com |
| Wikipedia's Page | Simplicity Outdoor |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)