Simplicity 8526 9528 10530 11532 Snow Blower Owners Manual

Safety   Rules
2
1.Keep in mind the operator is responsible for acci-
dents occurring to other people or property.
8.  Always follow the engine manual instructions for stor-
age preparations before storing the unit for both short
and long term periods.
9.  Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
10.Maintain or replace safety and instruction labels as
necessary.
11.Keep nuts and bolts tight and keep equipment in
good condition.
12.Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if
they are not functioning properly.
2
2.Data indicates that operators, age 60 years and
above, are involved in a large percentage of power
equipment-related injuries.  These operators should
evaluate their ability to operate the unit safely enough
to protect themselves and others from injury.
3.DO NOT wear long scarves or loose clothing that
could become entangled in moving parts.
2
2
4.Snow can hide obstacles.  Make sure to remove all
obstacles from the area to be cleared.
CHILDREN
13.
Components are subject to wear, damage, and dete-
rioration. Frequently check components and replace
with manufacturer’s recommended parts, when nec-
essary.
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the
unit and the operating activity. Never assume that children
will remain where you last saw them.
14.
15.
16.
17.
18.
Check control operation frequently. Adjust and ser-
vice as required.
1.
Keep children out of the area and under the watchful
care of another responsible adult.
Be alert and turn unit off if children enter the area.
Never allow children to operate the unit.
Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
Use only factory authorized replacement parts when
making repairs.
Always comply with factory specifications on all set-
tings and adjustments.
Only authorized service locations should be utilized
for major service and repair requirements.
Never attempt to make major repairs on this unit
unless you have been properly trained. Improper ser-
vice procedures can result in hazardous operation,
equipment damage and voiding of manufacturer’s
warranty.
Check shear bolts and other bolts at frequent inter-
vals for proper tightness to be sure the equipment is
in safe working condition.
2.
3.
4.
CLEARING A CLOGGED DISCHARGE
CHUTE
Hand contact with the rotating impeller inside the dis-
charge chute is the most common cause of injury associ-
ated with snowthrowers.  Never use your hand to clean
out the discharge chute.
To clear the chute:
1.
2
19.
EMISSIONS
1.  Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
SHUT OFF THE ENGINE.
.  Wait 10 seconds to be sure the impeller blades have
stopped rotating.
3
.  Always use a clean out tool, not your hands.
2.
If available, look for the relevant Emissions Durability
Period and Air Index information on the engine emis-
sions label.
SERVICE, MAINTENANCE, AND STORAGE
1.
Check shear bolts and other bolts at frequent inter-
vals for proper tightness to be sure the equipment is
in safe working condition.
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present
such as hot water and spacer heaters, or clothes dry-
ers.  Allow the engine to cool before storing in any
enclosure.
Always refer to the operator’s manual for important
details if the snowthrower is to be stored for an
extended period.
Maintain or replace safety and instruction labels as
necessary.
Run the machine a few minutes after throwing snow
to prevent freeze-up of the collector/impeller.
If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
Always observe safe refueling and fuel handling prac-
tices when refueling the unit after transportation or
storage.
IGNITION SYSTEM
1.
This spark ignition system complies with Canadian
ICES-002.
2.
3.
4.
5.
6.
7.
5
Product Specification
CategoriesSimplicity Snow Blower Manuals, Snow Blower Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandSimplicity, Snow Blower
Document File TypePDF
Publishersimplicitymfg.com
Wikipedia's PageSimplicity Outdoor
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website