Simplicity H924RX 1695515 Snow Blower Owners Manual

en
18.
19.
Never direct discharge at bystanders or allow anyone in front of the unit.
Never leave a running unit unattended. Always disengage the auger and
traction controls, stop engine, and remove keys.
Do not operate the unit while under the influence of alcohol or drugs.
Keep in mind the operator is responsible for accidents occurring to other
people or property.
Data indicates that operators, age 60 years and above, are involved in a
large percentage of power equipment−related injuries. These operators
should evaluate their ability to operate the unit safely enough to protect
themselves and others from injury.
DO  NOT wear long scarves or loose clothing that could become
entangled in moving parts.
2.  Never store the machine with fuel in the tank inside a building where
ignition sources are present such as hot water and space heaters, or
clothes dryers. Allow the engine to cool before storing in any enclosure.
3.
Always refer to operator’s manual for important details if the
snowthrower is to be stored for an extended period.
20.
21.
4.
5.
Maintain or replace safety and instruction labels as necessary.
Run the machine a few minutes after throwing snow to prevent
freeze−up of the collector/impeller.
22.
6.  If fuel is spilled, do not attempt to start the engine but move the machine
away from the area of spillage and avoid creating any source of ignition
until fuel vapors have dissipated.
7.  Always observe safe refueling and fuel handling practices when
refueling the unit after transportation or storage.
23.
24.
Snow can hide obstacles. Make sure to remove all obstacles from the
area to be cleared.
8.  Always follow the engine’s manual instructions for storage preparations
before storing the unit for both short and long term periods.
9.
Always follow the engine manual instructions for proper start-up
procedures when returning the unit to service.
Children
10.
11.
Keep nuts and bolts tight and keep equipment in good condition.
Never tamper with safety devices. Check their proper operation
regularly and make necessary repairs if they are not functioning
properly.
Components are subject to wear, damage, and deterioration. Frequently
check components and replace with manufacturer’s recommended
parts, when necessary.
Tragic accidents can occur if the operator is not alert to the presence of
children. Children are often attracted to the unit and the operating activity.
Never assume that children will remain where you last saw them.
12.
1.
Keep children out of the area and under the watchful care of another
responsible adult.
2.
3.
4.
Be alert and turn off if children enter the area.
Never allow children to operate the unit.
Use extra care when approaching blind corners, shrubs, trees, or other
objects that may obscure vision.
13.Check control operation frequently. Adjust and service as required.
14.Use only factory authorized replacement parts when making repairs.
15.Always comply with factory specifications on all settings and
adjustments.
16.
Only authorized service locations should be utilized for major service
and repair requirements.
Clearing A Clogged Discharge Chute
17.
Never attempt to make major repairs on this unit unless you have been
properly trained. Improper service procedures can result in hazardous
operation, equipment damage and voiding of manufacturer’s warranty.
Hand contact with the rotating impeller inside the discharge chute is the
most common cause of injury associated with snowthrowers. Never use
your hand to clean out the discharge chute.
Emissions
To clear the chute:
1.
2.
3.
SHUT OFF THE ENGINE.
Wait 10 seconds to be sure the impeller blades have stopped rotating.
Always use a clean out tool, not your hands.
1.
Engine exhaust from this product contains chemicals known, in certain
quantities, to cause cancer, birth defects, or reproductive harm.
2.  If available, look for the relevant Emissions Durability Period and Air
Index information on the engine emissions label.
Service, Maintenance And Storage
Ignition System
1.
Check shear bolts (pins) and other bolts at frequent intervals for proper
tightness to be sure the equipment is in safe working condition.
1.  This spark ignition system complies with Canadian ICES-002.
1
742227
8
Product Specification
CategoriesSimplicity Snow Blower Manuals, Snow Blower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 94 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandSimplicity, Snow Blower
Document File TypePDF
Publishersimplicitymfg.com
Wikipedia's PageSimplicity Outdoor
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website