english / USA
!
Warning!
!
Warning!
!
Warning!
If the electric edger strikes a foreign
object, follow these steps: switch off the
motor and disconnect the plug, inspect
for damage and repair any damage
before operating the product.
If the cutting tool or deflector becomes
clogged or stuck, always switch off the
motor and disconnect the plug and make
sure the cutting tool has stopped, before
cleaning. Grass, weeds, etc. should be
cleaned off the cutting tool at regular
intervals.
Never attempt to operate any electric
edger with one hand. Loss of control of
the electric edger resulting in serious or
fatal injury may result.
In order to reduce risk of eye injury
always wear proper eye protection and
operate product from position where
guards or deflector blocks the line of
sight to the cutting tool.
!
Warning!
Do not overreach. Keep proper footing
Do not use the electric edger for any job
except that for which it is intended. Use
only for edging in grass, weeds and soft
green plants.
and balance at all times.
!
Warning!
Keep hands and feet away from cutting
!
Warning!
area.
!
Warning!
Never divert discharge of material
toward bystanders nor allow anyone
near the area of operation. Use care in
directing discharge to avoid glass
enclosure, automobiles, and the like.
!
Warning!
This electric edger is normally to be
used at ground level with the cutting
attachment perpendicular to the ground.
Use of an electric edger above ground
level or with the cutting attachment
parallel to the ground may increase the
risk of injury, since the cutting
During cutting, check the tightness and
the condition of the cutting tool at regular
intervals. If the behavior of the tool
changes, switch off the motor
To reduce the risk
of injury from
immediately, hold the electric edger very
firmly and brake the cutting tool to a
standstill by pressing it against the
ground. Unplug the unit and check the
nut securing the tool for tightness and
the cutting tool for cracks and damage.
thrownobjectsand
blade contact,
attachment is more fully exposed and
the edger may be more difficult to
control. Never use your electric edger as
a hedge trimmer.
never operate any
edger without a properly mounted
deflector. Keep the skirt on the deflector
adjusted properly at all times (see
chapter on mounting the cutting tool of
your owner's manual). Keep guards in
place and in working order.
12
EC 70
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL EC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)