english / USA
Gearbox
Replacing the Depth Wheel
Replacing the Skirt
Lubrication
1
3
2
4
2
1
2
Have worn depth wheel replaced by
your STIHL dealer.
The end of the thread on screw (1) is
caulked to ensure that the wingnut (2)
does not work loose and be lost.
Removing the skirt
:
Release and remove screw (1)
1
along with washer (2).
:
Pull the skirt (3) off the lug (4) and
out of the deflector
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
Check grease level regularly, about
every 25 hours of operation.
guaranteed. In such a case the screw
and wingnut should be replaced by your
STIHL dealer.
:
:
5
3
Unscrew the filler plug (1).
If no grease can be seen on the
inside of the filler plug,
screw the tube (2) of STIHL gear
lubricant for brushcutters * into the
filler hole.
Position of skirt
:
Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
:
:
Squeeze 5 – 10 g (0,01 – 0,02 lb)
grease into the gear housing.
!
Do not completely fill the gear
housing with grease.
Refit and tighten the filler plug.
*
See "Special Accessories".
EC 70
21
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL EC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)