english / USA
Replacing the Cutting Blade Storing the Machine
For periods of three months or more:
1
:
Remove, clean and inspect the
A
cutting blade.
3
4
:
Thoroughly clean the machine,
paying special attention to the
cooling air inlets.
B
C
:
Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users.
Fitting the skirt
Never attempt to repair a bent, warped
or cracked blade by straightening or
welding – it may shatter at high speed
and cause serious or fatal injury.
:
Push the skirt (3) into the slot in the
deflector until it can be engaged on
the lug (4).
Replace such a blade with an original
STIHL cutting blade, part number
4133 713 4101 (marking 33/01).
:
:
Fit the washer on the screw.
Insert screw and tighten it down
firmly.
:
Replace the blade (1) when length
(A) is no longer sufficient to obtain
the required depth of cut (C) and
maintain an adequate ground
clearance (B).
:
:
To avoid out-of-balance: check
cutting blade on STIHL balancer
5910
850 2600.
Do not resharpen the blade.
22
EC 70
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL EC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)