English / USA
Mounting the Loop Handle
Adjusting the Throttle
Cable*
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled.
1
4
2
3
5
A
50 mm
( 2" )
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
:
:
Fit the loop handle (1) on the drive
tube 8" / 20 cm (A) forward of the
control handle (2).
:
Fit square nut (4) in the loop handle,
insert the clamp screw (5) from the
other side and tighten down
securely.
Position the clamp (3) against the
drive tube and slide it into the loop
handle.
Adjusting loop handle to most
comfortable position:
:
:
Release clamp screw (5).
Move the loop handle along the
drive tube as required - retighten the
clamp screw.
*
see "Guide to Using this Manual"
FC 110
15
Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
---|---|
Tags | STIHL FC 3110 |
Download File |
|
Language | English, EspanĚol |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)